6Th SENSE CRISP
Use this function to quickly reheat your
| F |
| food from frozen to serving temperature. | |
|
|
| ||
|
|
| This function is used only for frozen ready- | |
| 2 |
| made food. | |
1 | 3 | 4 | ||
|
1.Turn the multifunction knob to the Auto position.
2.Press the Auto button to select the desired auto function.
3.Turn the +/- knob to choose desired food class.
Step a & b need only to be performed when food class #5 is chosen.
(a). Press the Select button (default weight is displayed).
(b). Turn the +/- knob to set the weight of the food.
4. Press the Start button.
Adjusting doneness
When using this function, you also have the possibility to personally control the end result through the Adjust doneness feature. This feature enables you to achieve higher or lower end temperature or longer and shorter time. The standard setting normally gives you the best result.
In case the food you heated became too warm to eat at once. You can easily adjust this before you use this function the next time.
This is done by selecting a Hi or Low level with the +/- knob.
+Increases the end
temperature.
Do not use with this function.
Note:
The doneness can only be set or altered during the first 20 seconds of operation including
when “ 
” is displayed.
The program should not be interrupted as
long as “ 
” is displayed.
The Program can be interrupted when the time is displayed.
During the heating process the oven may stop (depending on program) and prompts you to “TURN” food.
— Open the door.
— Turn the food.
—Close the door and restart by pressing the Start button.
Note: the oven continues automatically after 1 min if the food hasn’t been turned. The heating time will be longer in this case.
Only use the supplied Crisp plate with this function. Other available Crisp plates on the market will not give the correct result when using this function.
IMPORTANT!
Do not place any containers or wrappings on the Crisp plate!
Only the food is to be placed on the Crisp plate.
15