Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use your refrigerator Glass shelves are strong enough to hold bottles, milk and other heavy food (terns
G/cm shelves ore heavy Be careful
To remove glass shelves:
1Tilt up at front. 2 Lift up at back.
3 Pull shelf straight out
To replace:
I. Gurde the rear hooks into the slots In the shelf supports
2Tilt up front of shelf until hooks drop into slot Lower front of shelf to level positron
Moving the meat pan.. .
The meat pan can be taken out and moved the Removing:
same way as the shelves. Remove the meat pan first 1 Slrde the meat pan out to stop
I2 Lrft the front of meat pan
3Slrde pan the rest of the way out
4Tilt cover up at front
5Lrft up at back.
6Pull strarght out
Replaclng:
1Guide the rear hooks Into the slots In the shelf supports.
2Tilt up front of cover untrl rear hooks drop Into slots. Lower front of cover to level positron
3Replace meat pan In reverse order.
Removing the crispers
Removing crispers:
?Skde cnspers stratght out to stop
2 Lift the front
3 Slrde the rest of the way out
4 Replace in reverse order
and crisper covers...
the Cover.
Removing covers:
Covers are held In by two pegs at the back and t’*L notched tabs in front
1 Press front out of wav
2 Lift cover front
3Loftback out of pegs
4Replace In reverse order
Adjusting the door bins...
The 4 door bins are adystable to meet your Storage needs
To remove door bins:
I. Lift front of bin slightly.
2 Slide bin out of support slot
3. Replace in reverse order
t ~?ecessar~~the. center leg can be made shorter or orjger to help level the crisper covers Turn the leg clxkwnlse to make I+ longerTurn the leg counterclock- w se ts shorten it
support slot
Removing the freezer shelf...
’ Loftfront slightly
2 Loftback off supports
.3 Replace In reverse order
litt the Front Then the Back