Changing the light bulb on some models | Whirlpool FREEZERS instruction

Whirlpool FREEZERS warranty Changing the light bulb on some models

Page 11

Changing the light bulb (on some models)

Electrical Shock Hazard

Before removing the light bulb, either turn Temperature Control to OFF and unplug the freezer, or disconnect the electricity leading to the freezer at the main power supply.

Shock and injury can occur if electricity remains connected.

To replace interior light:

1.Disconnect freezer from power supply, and turn Temperature Control to OFF.

NOTE: Turning Temperature Control to OFF does not disconnect power to

the freezer.

2.Remove the light shield by squeezing sides slightly and pulling out.

3.Replace bulb with 15watt appliance bulb

4.Replace light shield. Insert back tabs into slots and squeeze shield slightly to insert front tabs into slots.

5.Reconnect freezer to power supply and refer to “Setting the temperature control” on page 8.

Light shield

Using the key eject lock (on some models)

If your freezer is equipped with a lock, it can help reduce the hazard of child entrapment.

To lock or unlock the freezer, you must hold the key in the lock while turning. The lock is spring loaded, so the key cannot be left in the lock.

If the key is lost, contact your Roper dealer for a replacement. Always give the complete model and serial number of your freezer when requesting a replacement key.

Image 11

Contents

UseAndCare Available Hours Day Thank you for buying a Roper@ appliancePlease record your model’s information Our toll-freeHelp us help You Freezer SafetyYour safety is important to us Style Parts and FeaturesModel and serial number label Locating the proper electrical supply Installing Your FreezerInstalling the handle Cleaning your freezer Choosing the proper location Completing the installationAdjusting the temperature control Using Your FreezerSetting the temperature control Using the storage gate on some models Using the refrigerated shelves on some modelsUsing the storage basket on some models On some models Using the drain systemRemoving the base grille on some models Changing the light bulb on some models Using the key eject lock on some modelsModels Cleaning manual-defrostCaring for Your Freezer Cleaning frost-free models Outages What to do during powerMoving care Check the Following TroubleshootingIf you are not satisfied with how the problem was solved Requesting Assistance or ServiceIf you need service If you need FSP@ Replacement partsIndex CleaningRoper Domestic Freezer Warranty

Whirlpool FREEZERS warranty Changing the light bulb on some models

Changing the light bulb (on some models)

Using the key eject lock (on some models)