Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to it at the main power supply.
Failure to do so could resuk in personal injury.
To change refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to remove bulb.
3.Replace bulb with a
4.Reconnect refrigerator to power supply.
To change crisper light (RS25BR):
1.Disconnect refrigerator from power supply.
2.Pull top of light shield forward until it snaps free.
3.Lower light shield to clear bottom supports.
4.Pull light shield straight out to remove.
5.Replace bulb with a
6.Replace light shield in reverse order.
7.Reconnect refrigerator to power supply.
To change freezer light:
1.Disconnect refrigerator from power supply.
2.Grasp front of light shield.
3.Pull bottom of light shield forward until it snaps free.
4.Replace with a
5.Press light shield straight on until it snaps into place.
6.Reconnect refrigerator to power supply.
To change upper freezer light (RS25BR):
1.Disconnect refrigerator from power supply.
2.Lift top of light shield up and pull shield out.
3.Replace bulb with a
4.Place light shield over bulb and snap shield into place.
5.Reconnect refrigerator to power suppfy.
NOTE: Not all commercial appliance bulbs will fii your refrigerator. Be sure to replace bulb with one of the same size and shape.
16