Drawer Removal
To avoid possible injury, product, or property damage, you will need two people to perform the following instructions.
To Remove:
I. Pull drawer open to full extension.
2, Pull upper basket out to full extension and lift out to remove.
3.Lift lower basket straight up and out to remove.
4.On each side rail is a basket cradle with two snap attachments. To release each cradle, unlatch the snaps by pushing them inward, away from the side rail system. Lift the cradles off of the rails.
5.Lift top of drawer front to unhook supports from rail system. Lift door front out to remove.
To Install:
I. Pull both rails out to full extension.
2.While supporting door front, hook supports into tabs located on inside of rail.
3.Lower door front into final position.
4.Place the basket cradles back onto the side rails.
Align snaps with the slots on the side rails and press each snap towards the rail until it clicks.
5,With rails pulled out to full extension, set the basket straight down into the basket cradles.
6. Slide upper basket into freezer. Make sure that rear of basket | f | |
hooks behind rail catch. | ||
|
/
/