Whirlpool EV20VS manual Installing or replacing the battery, Battery, Power Saving Control

Page 6

Installing or replacing the battery

Alarm

Switch

Installing:

1.Move the Temperature Alarm Switch to OFF.

2.Remove the base grille (see page 7).

3.Carefully position the battery connector.

4.Place the connected battery - with the termi- nols pointing down - between the Tempera- ture Alarm and the battery clomp.

5.Replace the base grille.

6.Move the Temperature Alarm Switch to the TEST position. The alarm should sound.

7.Move the switch to OFF until the freezer is cold. Then move the switch to ON.

\

Reph:ing:

1.Rem.>ve the base grille (see page 7).

2.Carc~fully pull the battery forward out of the clan p.

3.Unpl&Jg the battery.

4.lnstc,I o new 9-volt alkaline battery.

5.Repl.lce the battery in the clomp with the ter- mint Is pointing down.

6.Replace the base grille.

7.Test I he battery.

8.Mov’:? the Temperature Alarm Switch to ON.

The battery

l l

l

l

A new alkaline

battery

should

last

up

to one

year. Test the’ battery

often.

 

If the freezer

air

temperature

should

become

too

worm, a

“lew battery should

sound the

alarm for up

to

48

hours.

 

 

 

 

 

 

 

 

 

 

The “low battery”

 

beep

(chirp)

should

last

about

7 days

Replace

the foiling

battery

immediately.

The

beep

(every

 

30

to 60

seconds)

cannot

I )e turned

off.

 

If you hove been away from home for more than a day, al .vays check your freezer and TEST the battery

The Power Saving Control.. .

operates electric heaters. These heaters help prevent moisture from forming on the outside of the freezer when humidity is high.

The key eject lock...

con help reduce the hazard of child entrap Iment.

POWER SAVING

CONTROL

.--

 

 

REDUCES

POWER

,1l

 

EXTERIOR

 

MOISTURE

 

F

nhl

 

OFI

-. .

 

I II

l Use the OFF setting when humidity is low.

l Use ON if moisture forms on outside of freezer

To Icck or unlock the freezer you must hold the key in the lock while turning. The lock is spring loade :I so the key cannot be left in the lock.

If the key is lost, contact your WHIRLPOOL dealer

for a ,eplacement. Always give the complete mode and serial number of your freezer when

reque ,ting a replacement key.

6

Image 6
Contents Upright Freezer Parts and features Before you do anything elseCopy your Model and Serial Numbers he.re Contents Before you plug itLnstal I the battery Install properlyClean it Level freezerYour Setting Cold ControlTemperature Alarm Adjus ting cold controlPower Saving Control Installing or replacing the batteryBattery Key eject lockChanlging light bulb Cleaning your freezerBottom basket Removing the base grilleCleaning Chart To wrap foods Freezing food in your freezer m-3Packaging and sealing food LoadingEnergy saving tips Storing Frozen FoodVacations Shutting off and movingIf you need assistance If you have a problem‘Before calling for assistance You NeedWhirlp~~ol