Whirlpool 9.76E+13 Before you start, Tools needed, Parts supplied, Mobile home installation

Page 2

Before you start...

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER

You can be killed or seriously injured if you don'timmediately follow instructions.

WARNING

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or electrical shock.

Proper installation is your responsibility. A qualified technician must install this range. Make sure you have everything necessary for correct installation. It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the oven frame behind the storage drawer panel.

Check location where range will be installed. The range should be located for convenient use in kitchen.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.

All openings in the wall or floor where ranges is to be installed must be sealed.

Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

Grounded electrical outlet is required. See “Electrical requirements” section.

Mobile home installation

The installation of this range must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A*, or with local codes.

When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

Four-wire power supply cord or cable must be used in a mobile home installation. The appliance wiring will need to be revised. See “Four-wire electrical connection” section.

The floor anti-tip bracket must be

installed. To install

the anti-tip bracket shipped with the range, see Page 5 and

the anti-tip bracket template.

Copies of the standards listed may be obtained from:

*National Fire Protection Association One Batterymarch Park

Quincy, Massachusetts, 02269

Tools needed:

Follow all factory safety instructions included with your tools.

level

flat-blade screwdriver

3/8" drive ratchet

3/8" and 5/16" nut drivers

hand or electric drill

channel lock pliers

safety glasses

gloves

measuring tape or ruler

wood floors: 1/8" drill bit

concrete/ceramic floors:

3/16" carbide-tipped masonry drill bit (Hammer may be needed for anchors.)

Parts supplied:

Not shown: literature pack

2 plastic anchors

2 screws

floor-mounted

anti-tip bracket

(#10 x 1-1/2")

 

Brackets must be securely mounted to sub-floor. Thickness of flooring may require longer screws to anchor bracket to sub-floor. Longer screws are available from your local hardware store.

2

Image 2
Contents Installation Instructions Table of ContentsTools needed Mobile home installationBefore you start Parts suppliedProduct dimensions Cabinet dimensions/requirementsElectrical requirements If connecting to a four-wire systemIf connecting to a three-wire system Recommended ground methodNow start Electrical connectionThree-wire electrical connection Power supply cord methodFour-wire electrical connection Direct wire method Copper or Aluminum wire Operating position Check operation MEDIf you need assistance If you need serviceIf range does not operate Moving the range

9.76E+13 specifications

Whirlpool 9.76E+13 is a dishwasher model that embodies the brand's commitment to innovation and consumer satisfaction. This advanced appliance is designed to streamline the dishwashing process, making it a valuable addition to any kitchen.

One of the standout features of the Whirlpool 9.76E+13 is its impressive capacity. With the ability to accommodate up to 15 place settings, it is perfectly suited for both small families and larger gatherings. The flexible loading options, including adjustable tines and a third rack, allow users to customize the interior space to fit various dish sizes and shapes. This ensures that every item, from pots to delicate glassware, can be cleaned efficiently.

Energy efficiency is another hallmark of the Whirlpool 9.76E+13. Rated highly in energy performance, the dishwasher uses cutting-edge technologies to minimize water and energy consumption without compromising on cleaning power. The Eco Wash cycle is particularly noteworthy, as it uses less water and energy while still delivering exceptional cleaning results. This feature is not only environmentally friendly but also cost-effective for the user.

The integration of advanced washing technologies, such as the Sensor Cycle, further elevates the performance of this dishwasher. This intelligent system automatically detects soil levels and adjusts the wash cycle for optimal cleaning. Additionally, the Precision Clean feature utilizes high-pressure jets to ensure that even the toughest stains and food residues are effectively removed, resulting in sparkling clean dishes every time.

Noise levels are a common concern among dishwasher users, and Whirlpool addresses this with the Whisper Quiet technology. Operating at a mere 47 decibels, the dishwasher runs quietly, making it easy to use even during late-night hours or while entertaining guests.

Convenience and user-friendliness are also prominent in the Whirlpool 9.76E+13. The intuitive control panel features easy-to-understand buttons and settings, while the Delay Start option allows users to set the dishwasher to run at a more convenient time. Interior LED lighting enhances visibility, making sure that loading and unloading is an effortless task.

In summary, the Whirlpool 9.76E+13 is a sophisticated dishwasher that combines efficiency, advanced technology, and user-friendly features. Its capacity, energy-saving capabilities, and quiet operation make it an excellent choice for households seeking a reliable and modern kitchen appliance. Whether you are washing everyday dishes or hosting a special event, this dishwasher stands ready to deliver outstanding results.