Power supply cord method | Whirlpool 9.76E+13 instruction

Power supply cord method:

NOTE: The bag containing three aluminum terminal lugs is not used when connecting the range using a power supply cord.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use new 40 amp power supply cord.

Plug into grounded outlet.

Failure to follow these instructions can result in death, fire, or electrical shock.

5.Use either ring-type terminals or spade terminals with upturned ends to connect the power supply.

6.Complete electrical connection according to your type electrical supply (“Four-wire electrical connection” or “Three-wire electrical connection.”)

Four-wire electrical connection:

ground link

ground-link screw

Figure1

10.Connect the neutral wire (center wire) to the center terminal screw on the terminal block. See Figure 2.

11.Connect the other two wires (lines 1 and 2) to the outer screws on the terminal block. See Figure 2.

12.Securely tighten nuts with 3/8" nut driver for proper electrical connection.

13.Tighten the strain relief screws.

14.Replace the terminal block cover.

15.Plug power supply cord into grounded electrical outlet.

Three-wire electrical connection:

center terminal block screw

WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the power supply cord plug. If it will not fit the outlet, have a proper outlet

neutral wire (center wire)

center terminal block screw

ground link

line 1

neutral (center wire)

line 2

installed by a qualified electrician.

This range is manufactured with the neutral terminal connected to the cabinet. Use a three-wire, U.L.-listed, 40 amp power supply cord (pigtail); or if local codes Do Not permit ground through the neutral, use a four-wire power supply cord rated at 250 volts, 40 amps and investigated for use with ranges. (See

line 1

green ground wire

ground-link screw

line 2

U.L. listed strain relief and 40 amp range power supply cord

U.L.-listed strain relief and 40 amp range power supply cord

Figure 3

Use this method only if local codes permit connecting cabinet-ground conductor to neutral wire of power

“Four-wire electrical connection.”)

opening for conduit connector

remove knockout

for 40 amp

power cord

and U.L. listed

strain relief

1.Disconnect power.

2.Remove the knockout for the 40 amp power supply cord.

3.Assemble a U.L.-listed strain relief in the opening.

4.Insert the power supply cord through the strain relief, allowing enough slack to easily attach the wiring to the terminal block.

Figure 2

Use this method for new installations, mobile homes, recreational vehicles and whenever four-wire installation is required.

7.Remove the ground-link screw from the range frame. Save the ground-link screw. Bend up the ground link so that it does not contact the range. See Figure 1.

8.Connect the green ground wire from power supply cord to the range using the ground-link screw. The ground wire must be attached first and must not contact any other terminal. See Figure 2.

9.Use 3/8" nut driver and remove the outside nuts on the terminal block screws. Do not loosen the factory- tightened nuts behind the outside nuts.

supply cord.

7.Use 3/8" nut driver and remove the outside nuts on the terminal block screws. Do not loosen the factory- tightened nuts behind the outside nuts.

8.Connect the neutral wire (center wire) to the center terminal screw on the terminal block. See Figure 3.

9.Connect the other two wires (lines 1 and 2) to outer terminal screws on the terminal block. See Figure 3.

10.Securely tighten nuts with 3/8" nut driver for proper electrical connection.

11.Tighten the strain relief screws.

12.Replace the terminal block cover.

13.Plug power supply cord into grounded electrical outlet.

9.76E+13 specifications

Whirlpool 9.76E+13 is a dishwasher model that embodies the brand's commitment to innovation and consumer satisfaction. This advanced appliance is designed to streamline the dishwashing process, making it a valuable addition to any kitchen.

One of the standout features of the Whirlpool 9.76E+13 is its impressive capacity. With the ability to accommodate up to 15 place settings, it is perfectly suited for both small families and larger gatherings. The flexible loading options, including adjustable tines and a third rack, allow users to customize the interior space to fit various dish sizes and shapes. This ensures that every item, from pots to delicate glassware, can be cleaned efficiently.

Energy efficiency is another hallmark of the Whirlpool 9.76E+13. Rated highly in energy performance, the dishwasher uses cutting-edge technologies to minimize water and energy consumption without compromising on cleaning power. The Eco Wash cycle is particularly noteworthy, as it uses less water and energy while still delivering exceptional cleaning results. This feature is not only environmentally friendly but also cost-effective for the user.

The integration of advanced washing technologies, such as the Sensor Cycle, further elevates the performance of this dishwasher. This intelligent system automatically detects soil levels and adjusts the wash cycle for optimal cleaning. Additionally, the Precision Clean feature utilizes high-pressure jets to ensure that even the toughest stains and food residues are effectively removed, resulting in sparkling clean dishes every time.

Noise levels are a common concern among dishwasher users, and Whirlpool addresses this with the Whisper Quiet technology. Operating at a mere 47 decibels, the dishwasher runs quietly, making it easy to use even during late-night hours or while entertaining guests.

Convenience and user-friendliness are also prominent in the Whirlpool 9.76E+13. The intuitive control panel features easy-to-understand buttons and settings, while the Delay Start option allows users to set the dishwasher to run at a more convenient time. Interior LED lighting enhances visibility, making sure that loading and unloading is an effortless task.

In summary, the Whirlpool 9.76E+13 is a sophisticated dishwasher that combines efficiency, advanced technology, and user-friendly features. Its capacity, energy-saving capabilities, and quiet operation make it an excellent choice for households seeking a reliable and modern kitchen appliance. Whether you are washing everyday dishes or hosting a special event, this dishwasher stands ready to deliver outstanding results.