in screw holes so that they are flush with the wall.Note: At least one screw must be installed through a stud. Leave a 3/8” (6 mm) of each screw exposed.
chimney screw holes
centerline
upper hood screw holes
template
4)Attach Chimney Mounting Bracket
lower hood screw holes | 30" min. |
|
Figure 3: Prepare Wall
Attach spacers to holes on chimney mounting bracket arms, as seen in “Attach Mounting Brackets” on page 5.
Attach chimney mounting bracket to wall through chimney screw holes created in previous step. Use two screws.
| Figure 4: Attach Mounting Brackets |
5) Hang the Hood | Place the hood by sliding the mounting holes in the top of the hood over the top |
| hood screws. Check and adjust for level. Tighten the screws. |
English 5