Install the Hood ALL Blowers | Broan E4DLSR, P408ICAT, MH4CFL42E

10. INSTALL THE HOOD (ALL BLOWERS)

INTERNAL BLOWER: Run power cable to installation location. Place the hood in its location. Mark the position of the screws (smaller part of the key holes [A]) with a pen. Remove the hood and install the (4) 1/2” double thread screws at marked positions, leaving a 1/8” gap. Remove wiring cover. Insert the cable in the hood through the wire clamp and tighten the wire clamp to secure the cable. Place the hood under the cabinet and slide it into position. Make sure the adapter (or the transition) enters the ducting. Secure the hood by tightening the screws completely. Install the last 1/2” double thread screws in the remaining holes [B].

INTERNAL BLOWER HOOD	EXTERIOR OR IN-LINE BLOWER HOOD
	A
	B
B
	A
	B
HD0265

EXTERIOR OR IN-LINE BLOWER: Run power cable to installation location. Place the hood in its location. Mark the position of the screws (smaller part of the key holes [A]) with a pen. Remove the hood and install the (4) 1/2” double thread screws at marked positions, leaving a 1/8” gap. Remove wiring cover on top of the hood, punch-out the electrical knock-out and install the wire clamp. Insert the cable in the hood through the wire clamp and tighten the wire clamp to secure the cable. Connect wiring (see instructions included with exterior or in-line blower). Place the hood under the cabinet and slide it in position. Secure the hood by tightening the screws completely. Install the last 1/2” double thread screws in the remaining holes [B].

11. CONNECT WIRING (ALL BLOWERS)

!WARNING

Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with all applicable codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting means to prevent power to be switched on accidentally.

Remove wiring cover from rough-in plate or electrical compartment and set aside.

INTERNAL BLOWERS: Connect cable into wiring box using wire connectors. Connect BLACK to BLACK, WHITE to WHITE and GREEN or bare wire under GREEN ground screw.

CAUTION

The ORANGE wire (A) is for make-up air device connection only. If there is no make-up air device, never remove the cap on the ORANGE wire end.

Reinstall wiring cover.

IN-LINE OR EXTERIOR BLOWERS: See instructions included with blower.

HE0088

12.INSTALL THE BLOWER (EXTERIOR OR IN-LINE BLOWER HOOD)

!WARNING

Do not plug the two cords together.

Plug the 3-prong plug cord from rough-in plate to the 3-prong male connector inside the hood (A) and the 2-prong male connector cord from rough-in plate to the 2-prong plug inside the hood (B).

HE0078

- 11 -

E4DLSR, E4DLSRCB, MH4CFL42E, P408ICAT specifications

Broan offers a diverse range of high-quality ventilation solutions, and among its distinctive products are the Broan E4DLSRCB, E4DLSR, MH4CFL42E, and P408ICAT. Each of these models combines cutting-edge technology with thoughtful design to enhance air quality and ensure maximum efficiency in both residential and commercial settings.

The Broan E4DLSRCB is a high-performance range hood featuring a sleek design that seamlessly integrates into contemporary kitchen aesthetics. Its standout feature is the multiple-speed blower that allows users to customize ventilation levels according to cooking needs. Equipped with dishwasher-safe filters, it simplifies maintenance while providing powerful smoke and odor removal. Additionally, the E4DLSRCB includes integrated LED lighting, enhancing visibility and ambiance during meal preparation.

Next in line is the Broan E4DLSR. This model shares the design elegance of the E4DLSRCB but comes with innovative features catering to different cooking styles. With its advanced control panel, the E4DLSR allows intuitive operation and includes a deadline timer for added convenience. The strong suction power of this model ensures a clean cooking environment while minimizing noise disruption, making it an ideal choice for family kitchens.

The MH4CFL42E is another impressive offering from Broan, designed specifically for versatile installation. This model can be utilized in various settings such as wall-mounted or under-cabinet applications. One of its most remarkable aspects is the energy-efficient fluorescent lighting, which not only illuminates your cooking space effectively but also contributes to lower energy costs. The MH4CFL42E’s quiet yet powerful motor ensures a pleasant cooking experience without overwhelming noise levels.

Finally, the Broan P408ICAT captures user attention with its unique ductless operation, offering a flexible and efficient solution for kitchens lacking traditional ventilation systems. The P408ICAT is designed with a charcoal filter system that effectively captures odors and vapors, allowing for a cleaner indoor environment. Its sleek design complements modern kitchens, and the easy-to-replace filters mean that maintenance is a breeze.

In summary, the Broan E4DLSRCB, E4DLSR, MH4CFL42E, and P408ICAT provide a variety of features that cater to different kitchen needs. With advanced motors, energy-efficient lighting, and user-friendly designs, these range hoods are essential for anyone looking to enhance their kitchen's air quality efficiently and stylishly. Whether you're a home cook or a professional chef, these products from Broan deliver exceptional performance to meet a range of cooking demands.