Broan 64000 installation instructions Prepare the Installation, Install Backsplash Optional

Page 6

2. PREPARE THE INSTALLATION

Make sure that the following items are included:

-Range hood

-Accessories:

Filters

Bag of parts including:

(4)lock nuts, (1) wire clamp, (8) 1/2” double thread screws, (2) wire connectors,

(2)1/2” standard screws, (6) 3/8” screws. Parts sold separately:

-Interior blower Model P5 includes blower, rough-in kit, flow deviator and 31/4” x 10” adapter

-Interior blower Model P8 includes blower, rough-in kit, flow deviator and 31/4” x 10” adapter and 31/4” x 14” adapter

-In-line blower assembly HLB3, HLB6, HLB9 or HLB11 (all include transition)

-In-line and exterior blower rough-in plate model 332KR, required for all In-line or Exterior Blowers

-Exterior blower assembly 331H, 332H, 335 or 336

-Halogen lights (120V, 50W, PAR 20)

-Heat lamps (120V, IR 175W, PAR 38)

-RMP Series Backsplash (optional)

-Baffle filters (optional)

-Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.

NOTE: For cabinets with recessed bottom, attach wood filler strips (not included) on each sides, as shown below. Use two (2) 2-inch wide strips for 30’’ wide hoods, and four (4) 2-inch wide strips for wider hoods, cut to length. See below for wood filler strip locations.

 

HOOD

 

LOCATIONS

 

 

 

WIDTHS

A

 

B

 

C

 

30’’

2’’

 

N/A

 

N/A

 

 

36’’

2’’

 

41/2’’

 

41/2’’

 

 

42’’

2’’

 

71/4’’

 

81/4’’

 

 

48’’

4’’

 

101/4’’

 

111/4’’

 

A

 

A

HD0079

B

C

3. INSTALL BACKSPLASH (OPTIONAL)

Backsplash must be installed before the hood shell because the hood shell covers the backsplash top mounting screws. In order to be able to install the backsplash, make sure you have at least 18’’ clearance between bottom of hood and range control panel or cooktop. (See instructions packed with backsplash.)

4. SELECT BLOWER OPTION (EXTERIOR OR INTERIOR)

INTERIOR BLOWER:

Follow all subsequent steps of this manual.

EXTERIOR BLOWER:

Refer to instructions packed with exterior blower and follow steps 6, 10, 12 and up of

 

the present manual.

- 6 -

Image 6
Contents Series This unit must be grounded Series Range Hood System Interior Blowers Series Range Hood System IN-LINE and Exterior Blowers Select Blower Option and Install Ductwork Prepare the Installation Install Backsplash OptionalSelect Blower Option Exterior or Interior Install the ROUGH-IN Plate ALL Blowers Install the Deviator Interior BlowerChoose the Opening Interior Blower Install the Adapter Interior Blower Install the Hood ALL BlowersConnect Wiring ALL Blowers Install the Blower Interior BlowerInstall the Blower Interior Blower CONT’D Dual blower P8Heat Lamps Install FiltersLight Bulbs USE and CareUSE and Care CONT’D OperationOperation CONT’D Never place highly flammable material under warming lampsService Parts SeriesSingle BLOWER/ROUGH-IN Model P5 Dual BLOWER/ROUGH-IN