1. SAFETY PRECAUTIONS
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling. Before operating your product, read this manual first so you are thoroughly aware of the potential safety hazards as well as understand the safety symbols and messages.
Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or proper damage.
When Installing the Unit
Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power cord in close proximity to heaters, and never place heavy objects
Be sure to replace the unit's terminal cover after connection completion. Because the voltage of up to 100 V is applied to the output terminals, never touch these terminals to avoid electric shock.
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface. Doing so may result in the unit falling down and causing personal injury and/or property
damage.
Install the unit only in a location that can
structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in
the unit falling down and causing personal injury and/or property damage.
When the Unit is in Use
To prevent a fire or electric shock, never open nor remove the unit case as there are high voltage components inside the unit. Refer all servicing to your nearest TOA dealer.
Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit. If they accidentally spill into the unit, this may cause a fire or electric shock.
Do not insert nor drop metallic objects or flammable materials in the ventilation slots of the unit's cover, as this may result in fire or electric shock.
Do not touch a plug during thunder and lightning, as this may result in electric shock.
Should the following irregularity be found during use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no further attempt to operate the unit in this condition as this
may cause fire or electric shock.
•If you detect smoke or a strange smell coming from the unit.
•If water or any metallic object gets into the unit.
•If the unit falls, or the unit case breaks.
•If the power supply cord is damaged (exposure of the core, disconnection, etc.)
•If it is malfunctioning (no tone sounds.)
2