Cannon 10935G, 10905G, 10938G, 10900G, 10908G, 10932G, 10930G, 10906G, 10936G Connecting to GAS Supply

Page 22

CONNECTING TO GAS SUPPLY

The cooker is designed to match the depth of standard 600mm worktops. An adaptor backplate should, therefore, be fitted within the shaded area shown to allow the cooker to be pushed fully to the wall. If a forward facing backplate is used, it must be chased into the wall.

460

180

250 490

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. LPG cookers should be connected with a hose suitable for LPG and capable of withstanding 50 mbars pressure. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70˚C.

22

Image 22

Contents Stratford Lichfield Contents Introduction For Your Safety Please read the precautions below before using your cookerLeave Unattended While Cooking To USE the Hotplate HotplateRelighting the Burner Safety Requirements for Deep FAT Frying HOW to Deal with a FAT FireTo USE the Grill GrillGrill PAN and Handle Do notOven To USE the OvenStorage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry ‘COOK CHILL’ Dishes‘SLOW COOK’ Setting Using the ‘SLOW COOK’ Setting for Slow CookingOven Cooking Chart Meat and PoultryYeast Mixtures Replacing a Battery Care and CleaningOven Heat Clean Linings Oven DoorsCooker Finish Cleaning Method Something Wrong With Your Cooker CheckDisposal of Your Product Location Installation InstructionsGAS Safety Regulations Provision for VentilationGeneral Technical Data DimensionsModel Space for Fixing Cooker HoodsLevelling UnpackingStability Bracket Connecting to GAS Supply Installation and Operational Checks Genuine Parts & Accessories After Sales ServiceRepair Service and Information Help Desk Extended Warranties