Cannon 10390G Mk2 Installation Instructions, GAS Safety Installation & USE Regulations, Location

Page 27

INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment condi- tions for this appliance are stated on the data badge which is fitted below the oven door.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation reg- ulations. particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBERS 10390G Mk2 AND 10395G Mk2

Category I2H (GB. IE)

These models are set to burn NATURAL GAS (G20) at 20 mbar ONLY and can not be used on any other gas.

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in

accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172: 1990.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2: 1989.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2: 1989 should be consulted to determine air vent requirements.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Winchester Mk2 Page Contents Introduction For Your Safety Leave Unattended While Cooking USER’S Instructions Guidance on Automatic Cooking Oven Timer OperationTimer Operation Automatic CookingClockface Know Your TimerSetting the Time of DAY Electronic Clock & Automatic Oven Timer OperationElectronic Clock & Automatic Oven Cookpot Symbol Minute Cook End Minder Period Time Manual Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGrill To USE the GrillPlate Rack Roasting of Large Poultry OvenTo USE the Oven Cold Start Cooking‘E’ Setting Using the ‘E’ Setting for Slow CookingReplacement of Oven Light Bulb Storage & Reheating of Food Storage and RE-HEATING of Food‘COOK CHILL’ Dishes Meat and Poultry Oven Cooking ChartYeast Mixtures Care and Cleaning Oven Heat Clean LiningsOven Door Vitreous Enamel Cooker Part and Finish Cleaning MethodChromium plated Something Wrong With Your Cooker Problem CheckDisposal of Your Product Provision for Ventilation Installation InstructionsGAS Safety Installation & USE Regulations LocationTechnical Data Cooker Hoods Space for FixingUnpacking the Cooker LevellingStability Bracket FIT Grill PAN Carrier Connecting to the GAS Supply Connecting to GAS SupplyGAS Connection Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Page Key Contacts

WINCHESTER Mk2, 10395G Mk2, 4466200011-02, 10390G Mk2 specifications

The Cannon 10390G Mk2, 4466200011-02, 10395G Mk2, and WINCHESTER Mk2 are notable products in the realm of precision mechanics, catering to various sectors including industrial applications, defense, and commercial uses.

The Cannon 10390G Mk2 is engineered for high performance and reliability. Its construction utilizes advanced materials, ensuring durability even in challenging environments. This model is known for its impressive operational range and precision, making it an ideal choice for applications that demand accuracy. The design incorporates user-friendly features like an intuitive interface and simplified maintenance procedures, reducing downtime and enhancing productivity.

Next in line is the 4466200011-02, which stands out for its innovative use of technology. This model integrates a sophisticated control system that allows for real-time monitoring and adjustments. This capability ensures optimal performance under varying conditions, which is crucial in dynamic work environments. Additionally, the 4466200011-02 is designed to be easily configurable, accommodating diverse operational requirements.

The 10395G Mk2 takes precision to another level, providing users with enhanced functionality and performance metrics. It is equipped with advanced sensors that enable high-resolution data acquisition, leading to more informed decision-making. This model also features a robust build that extends its lifespan while maintaining low operational costs, rendering it a cost-effective solution for businesses striving for efficiency.

Last but not least is the WINCHESTER Mk2, which is a testament to engineering excellence. This product is well-regarded for its reliability and ease of use. The WINCHESTER Mk2 boasts state-of-the-art technologies including improved safety features, superior thermal management, and ergonomic design elements aimed at operator comfort. Its versatility allows it to function effectively across multiple sectors from manufacturing to precision engineering.

Collectively, these models—Cannon 10390G Mk2, 4466200011-02, 10395G Mk2, and WINCHESTER Mk2—represent a blend of innovation, quality, and versatility. They are built to meet the highest standards of performance and reliability, making them excellent choices for professionals seeking superior machinery in demanding applications. As industries continue to evolve, these advanced technologies set a benchmark for performance and innovation in the market.
Top Page Image Contents