Cannon 10395G Mk2, WINCHESTER Mk2, 4466200011-02, 10390G Mk2 Space for Fixing, Cooker Hoods

Page 29

INSTALLATION INSTRUCTIONS

SPACE FOR FIXING

The cooker can be close fitted below hotplate level. This requires a minimum distance of 540mm between cupboard units of hotplate height.

Cupboards or walls to the side of the cooker must be 125mm away

Wall cupboards above hotplate level must also be 125mm away as shown

Where cupboards or any overhead surfaces are fitted above the cooker allow

a clearance of 500mm from the top of the grill to the underside of the overhead sur- face.

500mm MIN

125mm

MIN.

125mm

MIN.

540mm MIN

COOKER HOODS

If a cooker hood is to be installed, refer to the cooker hood manufactures’ instructions regarding fixing height.

27

Image 29 Contents
Winchester Mk2 Page Contents Introduction For Your Safety Leave Unattended While Cooking USER’S Instructions Timer Operation Oven Timer OperationAutomatic Cooking Guidance on Automatic CookingClockface Know Your TimerSetting the Time of DAY Electronic Clock & Automatic Oven Timer OperationElectronic Clock & Automatic Oven Cookpot Symbol Minute Cook End Minder Period Time Manual Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingPlate Rack GrillTo USE the Grill To USE the Oven OvenCold Start Cooking Roasting of Large PoultryReplacement of Oven Light Bulb ‘E’ SettingUsing the ‘E’ Setting for Slow Cooking ‘COOK CHILL’ Dishes Storage & Reheating of FoodStorage and RE-HEATING of Food Meat and Poultry Oven Cooking ChartYeast Mixtures Oven Door Care and CleaningOven Heat Clean Linings Vitreous Enamel Cooker Part and Finish Cleaning MethodChromium plated Something Wrong With Your Cooker Problem CheckDisposal of Your Product GAS Safety Installation & USE Regulations Installation InstructionsLocation Provision for VentilationTechnical Data Cooker Hoods Space for FixingStability Bracket Unpacking the CookerLevelling FIT Grill PAN Carrier GAS Connection Connecting to the GAS SupplyConnecting to GAS Supply Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Page Key Contacts