INSTALLATION INSTRUCTIONS
SPACE FOR FIXING
400 mm Min
The cooker can be close fitted below hotplate level. This requires a minimum distance of 600mm between cupboard units of hotplate height.
When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.
The diagram below illustrates the minimum clearance between the cooker and adjacent walls, cupboards etc.
The wall behind the cooker between the hotplate and 450mm above, and the width of the cooker, must be a
|
| If the cooker is to be fitted | |
Min |
| close to a corner base unit | |
| on the left hand side, ensure | ||
mm |
| ||
65 mm Min | that there is a clearance of | ||
750 | |||
| at least 50mm to allow the | ||
|
| ||
|
| oven door to open fully for | |
|
| when removing oven | |
|
| shelves. |
600 mm Min
COOKER HOODS
If a cooker hood is to be installed, refer to the cooker hood manufacturers’ instructions regarding fixing height.
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the
following parts are present: |
|
Grill pan and grid | Meat pan |
Pan supports (4) | Main oven shelves (2) |
Enamelled burner caps (4) | Literature |
Aluminium burner bodies (4) | Anti Splash tray |
26