Cannon 10555G Installation Instructions, Model Number 10556G, Location, Provision for Ventilation

Page 24

INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the data badge which is fitted on the back panel.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBERS 10550G, 10552G and 10555G

Category I2H (GB)

These models are set to burn NATURAL GAS (G20) at 20 mbar ONLY and can not be used on any other gas.

MODEL NUMBER 10556G

Category I3+ (GB)

These models are set to burn PROPANE GAS (G31) at 37 mbar and BUTANE GAS (G30) at 28-30 mbar

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in

accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

LPG Models shall not be installed in a room or internal space below ground level, e.g. in a basement.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2

should be consulted to determine air vent requirements.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Westminster Contents Introduction For Your Safety Please read the precautions below before using your cookerLeave Unattended While Cooking Timer Operation Automatic CookingGuidance on Automatic Cooking Know Your Timer ClockfaceOven Timer Operation Setting the Time of DAYAuto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill To USE the GrillPlate Rack Oven To USE the OvenCold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food ‘COOK CHILL’ Dishes‘SLOW COOK’ Setting Using the ‘SLOW COOK’ Setting for Slow CookingOven Cooking Chart Meat and PoultryYeast Mixtures Care and Cleaning Oven Heat Clean LiningsReplacement of Oven Light Bulb Oven DoorCooker Part and Finish Cleaning Method Problem Check Something Wrong With Your CookerDisposal of your product Disposal of old electrical appliancesInstallation Instructions GAS Safety Installation & USE RegulationsModel Number 10556G LocationTechnical Data Dimensions GeneralNatural GAS LPG Models Space for Fixing Cooker HoodsUnpacking the Cooker LevellingStability Bracket FIT Grill PAN Carrier Connecting to the GAS Supply Connecting to GAS SupplyGAS Connection Electrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks After Sales Service Repair Service and Information Help DeskGenuine Parts & Accessories Extended Warranties

10556G, 10552G, 10550G, 10555G specifications

Cannon 10555G, 10550G, 10556G, and 10552G are a series of high-performance office printers designed to meet the demands of modern workspaces. These printers are celebrated for their cutting-edge technology, reliability, and superior print quality, making them ideal for both small businesses and large enterprises.

One of the main features of these models is their exceptional print speed. The Cannon 10555G series boasts an impressive output of up to 55 pages per minute, ensuring that high-volume printing tasks are completed efficiently. The 10550G, 10552G, and 10556G also deliver competitive speeds, catering to various office needs while minimizing downtime. This efficiency is complemented by a large paper capacity, allowing users to load multiple reams of paper, reducing the frequency of refills during busy periods.

Another hallmark of these printers is their advanced imaging technology, which guarantees sharp text and vibrant images. With a high resolution of up to 1200 x 1200 dpi, users can expect crisp edges and fine details in their printed materials. The printers utilize precision grayscale and color printing technologies, ensuring that every document, whether it is a simple black-and-white report or a colorful marketing brochure, looks professional and polished.

User-friendliness has also been prioritized in the design of the Cannon 10555G series. They feature intuitive touch-screen interfaces that simplify navigation and allow for easy configuration of settings, adjustments, and monitoring of printing tasks. This focus on usability extends to their connectivity options, which include USB, Ethernet, and wireless connections. This versatility ensures that users can print from various devices, including computers, tablets, and smartphones, enhancing overall workflow and productivity.

Moreover, these models incorporate energy-saving features that help reduce overall operational costs while being environmentally friendly. The automatic duplex printing capability allows for double-sided printing, minimizing paper use and cost without compromising output quality.

Overall, the Cannon 10555G, 10550G, 10556G, and 10552G are state-of-the-art printers that combine speed, quality, user-friendliness, and ecological responsibility. They represent a smart investment for any organization seeking to enhance its printing capabilities while maintaining a commitment to efficiency and sustainability in their operations.
Top Page Image Contents