Electrical Connection

WARNING – THIS APPLIANCE MUST BE EARTHED.

CONNECT TO A 230-240V A.C. SUPPLY ONLY.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation.

The mains lead should be routed such that it cannot touch hot parts of the cooker i.e. the back panel above a height of 650mm from the floor.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

NOTE: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket – with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a 3 amp fuse which is approved to B.S. 1362.

IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in

accordance with the following code:

GREEN AND YELLOW	– EARTH
GREEN AND YELLOW	– EARTH		Blue to
BLUE	– NEUTRAL		Blue to
BLUE	– NEUTRAL		Neutral
BROWN	– LIVE
BROWN	– LIVE

		Cord Clamp

Green &

Yellow to

Earth

Brown to Live

3 Amp

Fuse

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:– The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with

the letter E or by the earth symbol or coloured green or green and yellow. The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. As the appliance must be earthed, do not use 2-pin sockets outlets, if you are in doubt, consult a qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size i.e. 0.75mm2 cross sectional area and temperature rating of 85˚ C e.g. heat resisting PVC, available from our parts department (see Back Cover).

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied a 3 amp ASTA approved fuse to BS1362 must be fitted.

NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

Make sure that the cable does not become trapped when pushing the cooker into position.

10556G, 10552G, 10550G, 10555G specifications

Cannon 10555G, 10550G, 10556G, and 10552G are a series of high-performance office printers designed to meet the demands of modern workspaces. These printers are celebrated for their cutting-edge technology, reliability, and superior print quality, making them ideal for both small businesses and large enterprises.

One of the main features of these models is their exceptional print speed. The Cannon 10555G series boasts an impressive output of up to 55 pages per minute, ensuring that high-volume printing tasks are completed efficiently. The 10550G, 10552G, and 10556G also deliver competitive speeds, catering to various office needs while minimizing downtime. This efficiency is complemented by a large paper capacity, allowing users to load multiple reams of paper, reducing the frequency of refills during busy periods.

Another hallmark of these printers is their advanced imaging technology, which guarantees sharp text and vibrant images. With a high resolution of up to 1200 x 1200 dpi, users can expect crisp edges and fine details in their printed materials. The printers utilize precision grayscale and color printing technologies, ensuring that every document, whether it is a simple black-and-white report or a colorful marketing brochure, looks professional and polished.

User-friendliness has also been prioritized in the design of the Cannon 10555G series. They feature intuitive touch-screen interfaces that simplify navigation and allow for easy configuration of settings, adjustments, and monitoring of printing tasks. This focus on usability extends to their connectivity options, which include USB, Ethernet, and wireless connections. This versatility ensures that users can print from various devices, including computers, tablets, and smartphones, enhancing overall workflow and productivity.

Moreover, these models incorporate energy-saving features that help reduce overall operational costs while being environmentally friendly. The automatic duplex printing capability allows for double-sided printing, minimizing paper use and cost without compromising output quality.

Overall, the Cannon 10555G, 10550G, 10556G, and 10552G are state-of-the-art printers that combine speed, quality, user-friendliness, and ecological responsibility. They represent a smart investment for any organization seeking to enhance its printing capabilities while maintaining a commitment to efficiency and sustainability in their operations.