Cannon C60GP Electrical Connection, Connect to a 230-240V A.C. Supply only

Page 33

ELECTRICAL CONNECTION

WARNING – THIS APPLIANCE MUST BE EARTHED.

CONNECT TO A 230-240V A.C. SUPPLY ONLY.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation.

The mains lead should be routed such that it cannot touch hot parts of the cooker i.e. the back panel above a height of 650mm from the floor.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

NOTE: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket – with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a fuse which is approved to B.S. 1362.

IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in

accordance with the following code:

GREEN AND YELLOW

– EARTH

 

Blue to

 

 

Neutral

 

BLUE

– NEUTRAL

 

 

 

 

 

 

 

 

BROWN

– LIVE

 

 

 

 

 

Cord Clamp

Green &

Yellow to

Earth

Brown to Live

3 Amp

Fuse

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:– The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with

the letter E or by the earth symbol or coloured green or green and yellow. The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. As the appliance must be earthed, do not use 2-pin sockets outlets, if you are in doubt, consult a qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size i.e. 1.0mm2 cross sectional area PVC cable, available from our parts department (see Back Cover).

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied an ASTA approved fuse to BS1362 must be fitted.

NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

Make sure that the cable does not become trapped when pushing the cooker into position.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Professional Contents Introduction Always For Your SafetyFor Your Safety Oven Timer Operation Automatic CookingGuidance on Automatic Cooking Clockface Setting the Time of DAY Auto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingLarge Easyglide Grill PAN GrillRelighting the Burner To USE the GrillTo USE the Main Oven Main OvenRoasting of Large Poultry Cold Start CookingStorage and RE-HEATING of Food ‘COOK CHILL’ DishesMeat and Poultry Main Oven Cooking ChartYeast Mixtures Using the ‘SLOW COOK’ Setting for Slow Cooking ‘SLOW COOK’ SettingGuidance on Using the TOP Oven TOP OvenTo USE the TOP Oven TOP Oven Cooking Chart Gas Shelf Food Oven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Oven DoorsCooker Finish Cleaning Method Care and CleaningSomething Wrong With Your Cooker Problem CheckSomething Wrong GAS Safety Installation & USE Regulations Installation InstructionsModel Numbers C60GP LocationBurner Technical DataCooker Hoods Space for FixingUnpacking the Cooker LevellingConversion for USE on Butane G30 or Propane G31 Stability Chain Connecting to GAS SupplyConnect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Page Key Contacts

C60GP specifications

The Canon C60GP is a cutting-edge printer that stands at the forefront of digital printing technology, specifically designed for high-volume commercial applications. This robust machine reflects Canon's commitment to providing solutions that deliver exceptional output quality while enhancing productivity and efficiency.

One of the main features of the C60GP is its outstanding print resolution. With a maximum resolution of 2400 x 1200 dpi, this printer produces sharp, vivid images and crisp text, making it ideal for applications ranging from brochures to high-end marketing materials. The advanced image processing technology ensures that color consistency is maintained across every print, delivering professional-quality results that meet the highest industry standards.

The Canon C60GP employs a unique processing engine that significantly speeds up print times. With a print speed of up to 60 pages per minute, businesses can expect rapid turnaround times, allowing them to meet demanding deadlines without compromising on quality. This efficiency is further enhanced by the machine's ability to handle a variety of media types and sizes, including heavy paper stocks, envelopes, and specialty finishes.

A standout characteristic of the C60GP is its versatility in handling various printing tasks. It features advanced finishing options such as stapling, hole punching, and booklet making, making it a comprehensive solution for print environments that require flexibility. This multifunctionality reduces the need for multiple devices, streamlining operations and saving valuable floor space.

The Canon C60GP is also equipped with innovative technologies to optimize performance and minimize downtime. The intuitive touchscreen interface simplifies operation, allowing users to navigate effortlessly through settings, adjust print options, and monitor job progress. Additionally, routine maintenance tasks are made straightforward, ensuring that the printer remains operational with minimal disruption.

With an emphasis on sustainability, the C60GP incorporates energy-efficient features that lower energy consumption without sacrificing performance. Canon's commitment to environmental responsibility is reflected in the design of this printer, making it an eco-friendly choice for businesses looking to reduce their carbon footprint.

In summary, the Canon C60GP combines high-speed, versatile printing capabilities with advanced technologies and sustainable practices. Its impressive features make it an ideal choice for businesses seeking reliable and efficient printing solutions that do not compromise on quality. With the Canon C60GP, organizations can elevate their printing capabilities and meet the increasing demands of today's dynamic markets.
Top Page Image Contents