Cannon 10850G, 10855G, 10856G installation instructions Clockface

Page 7

OVEN TIMER OPERATION

CLOCKFACE

The timer incorporates a 24 hour clock.

Ensure the correct time of day is always set, before using your cooker.

SYMBOLS

A ‘bell’ symbol will light up when you select a Minute Minder Period and will remain lit for the period set.

At the end of the Minute Minder Period, the timer will emit an audible tone and the ‘bell’ symbol will disappear.

The ‘cookpot’ symbol will light up either:–

When the timer is in manual mode, or

During the actual Cook Period.

‘AUTO’ will light up:–

When the timer is first turned on it will flash. It will go out when a time of day is set or when the timer is set to manual.

The ‘AUTO’ symbol will flash at the end of an Auto Cooking programme to indi- cate that the programme has finished.

(When the ‘AUTO’ symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the “Manual” button – The ‘AUTO’ symbol will go out).

TIMER FUNCTION BUTTONS

Minute Minder Here you can set a time period of up to 23 hours 59 minutes, that will count down.

ButtonWhen it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

AUTO COOKING PROGRAMME

Cook Period Button Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an “Auto Cooking” programme.

(e.g. If you set 2 hours, the food will be cooked for 2 hours).

End Time Button The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished.

Notes:

-When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer.

-If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.

Manual Button Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation.

“+” and “–” Buttons Used to adjust the various timer function settings.

7

Image 7
Contents Professional Traditional Contents Introduction Please read the precautions below before using your cooker For Your SafetyFor Your Safety Automatic Cooking Oven Timer OperationGuidance on Automatic Cooking Clockface Setting the Time of DAY Auto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingGrill PAN Handle Twin GrillTo USE the Grill Oven Positions FAN OvenTo Prepare Meat and Poultry for Roasting in Your FAN Oven Temperature and TimeFrozen Meat and Poultry Oven Control Conventional OvenOven Cooking Chart Baking Fan Oven Cooking Conventional Oven Cooking Storage Compartment ‘SLOW COOK’ SettingPreparing Food for Slow Cooking ‘HEAT CLEAN’ Liners Care and CleaningReplacement of Oven Light Bulb Cooker Finish Cleaning Method Something Wrong With Your Cooker Problem CheckSlow Recommended in the Cooking Charts Recommended setting slightly to suit your tasteProgramme or cannot get Timer to turn the ovenTimes Timer display shows ‘000’ Cannot set an ‘Auto Cook’Location Installation InstructionsGAS Safety Installation & USE Regulations Model Numbers 10850G, 10855G, 10856G Category II2H3+ GB. IEGeneral Technical Data DimensionsConversion for USE on Butane or Propane Cooker Hoods Space for FixingLevelling UnpackingStability Chain 450 Electrical Connection Extended Warranties After Sales ServiceRepair Service and Information Help Desk Genuine Parts & Accessories