Installation Instructions, Assemble the Hood

Installation Instructions

WARNING

•Do not install the range hood unless the electrical service provided meets the range hood specifications.

•Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information.

•A qualified technician must complete the installation of this built-in appliance. The owner is responsible to make sure the hood is properly installed.

•To avoid an electric shock hazard and property damage, locate electric wires and water pipes and avoid drilling in the vicinity.

•The range hood is heavy. To prevent personal injury and property damage install the hood only as specified below. Make sure all screws used to mount and assemble the hood are tight.

Electric Service Installation

The electrical connection box must be:

•Connected to a 120 Vac, 60 Hz dedicated, grounded, circuit protected by a 15 Amp circuit breaker or time delay fuse.

•Located a minimum of 17” (43.2 cm) above the bottom of the range hood.

Mounting Bracket Installation

1.Locate the mounting bracket and position it against the ceiling at the previously determined mounting location (see page 5).

2.Using a pencil, mark the four mounting hole locations on the ceiling.

3.Drill four 1/16” (1.6 mm) pilot holes at the mounting hole locations.

4.Attach the bracket using four #12 screws (not supplied). Make sure the screws penetrate into the wood mounting surfaces 1 1/2” (3.8 cm).

Assemble the Hood

warning

•Lifting and hanging the range hood requires two people. Do not attempt to lift the hood without assistance.

1.Place the hood assembly on a soft surface with the bottom side down during assembly to avoid damage.

2.Tip the hood up on it’s side and remove the filter(s) to reduce weight and avoid damage.

3.Inside the exhaust outlet(s) there are metal or plastic damper flaps. The flaps close to help prevent back- drafts when the blower is turned off. Make sure all the flaps open and close freely before proceeding. Remove any shipping tape that may be present.

4.Remove the tape that holds the wiring in place on top of the hood during shipment.

5.On models with two blowers: Put the exhaust cowling over the blower outlets on the top of the hood. Fasten the cowling in place with 14 machine screws.

DHI361, DHI421, DHI542, DHI482, DHI602 specifications

Dacor, a reputable name in the luxury kitchen appliance industry, has developed an impressive lineup of range hoods, specifically the DHI602, DHI482, DHI542, DHI421, and DHI361 models. Each model combines innovative technology, exceptional performance, and sophisticated design to meet the needs of modern culinary enthusiasts.

The DHI602 is a powerful 600 CFM range hood that features a sleek, integrated design, making it the perfect addition to any contemporary kitchen. Its dual blower system ensures optimal airflow, effectively capturing smoke and odors. Users benefit from multiple speed settings, allowing for tailored ventilation based on cooking intensity. Additionally, the DHI602 includes advanced LED lighting, providing ample illumination for culinary tasks while enhancing the kitchen's aesthetics.

Next in line is the DHI482, which boasts a robust 480 CFM performance. This model is designed with a seamless wall-mounted style that offers functionality without compromising on visual appeal. It incorporates a baffle filter system, which is easier to clean and ensures durable performance. The DHI482's quiet operation ensures an enjoyable cooking environment, even during intensive culinary projects.

The DHI542 stands out with its 540 CFM capacity, integrating a range of user-friendly features. It features a digital display and intuitive controls for easy operation. An auto timer function allows users to pre-set the duration for the hood operation, which is particularly handy when multitasking in the kitchen. The DHI542 also includes a charcoal filter for recirculation installation, providing versatility for homes lacking external venting options.

The DHI421 is characterized by its compact design and effective 420 CFM operation. This model is perfect for smaller kitchens where space is at a premium but does not compromise on performance and efficiency. The DHI421 uses a sleek, stainless-steel finish to seamlessly blend with various kitchen styles. Its dishwasher-safe filters not only offer convenience and ease of maintenance but also promote better indoor air quality.

Finally, the DHI361 is designed for those who prioritize efficiency in a smaller footprint. With a 360 CFM capacity, this model delivers essential ventilation while remaining energy efficient. The DHI361 is designed for straightforward installation and includes LED lights that enhance the cooking space. Its sleek design and functionality make it a favorite among those looking to elevate their kitchen aesthetics.

In summary, Dacor's range of range hoods—DHI602, DHI482, DHI542, DHI421, and DHI361—exhibits exceptional performance, cutting-edge technology, and elegant design. These models cater to a variety of kitchen sizes and styles, ensuring that every cooking experience is enhanced by superior ventilation and atmosphere.