Preparing Cappuccino and Latte | Capresso #303 guide

10.Important: Do not open the boiler cap. Do not remove the filter holder. First depressurize the machine. See chapter 3.

11.After de-pressurizing remove the filter holder by turning it to the left to the "open lock" symbol. Then push the thumb-guard of filter holder over the hot rim of the basket. Dump the used coffee (fig. 13) and rinse the basket and the filter holder under running water. Return the coffee/steam selector to the cup symbol.

8. PREPARING CAPPUCCINO and LATTE

Cappuccino and Latte are the most popular espresso-based coffee drinks. It is important that you follow the steps below precisely, otherwise you may not have enough steam pressure to froth and steam milk properly.

1.Fill a pitcher with 6 to 8 oz. of cold milk and set aside. The pitcher should have at least a 12 oz. capacity. Make sure the frother points outwards and the black frother nozzle is in place.

2.Follow steps 1 through 8 in chapter PREPARING ESPRESSO.

3.After approx. 2 1/2 to 3 minutes hot water will start forcing its way through the filter holder into the carafe. When the espresso coffee has reached the bottom marking of the glass carafe, slide the coffee/steam selector to the steam symbol.

4.Immerse the black frother nozzle into the pitcher with the milk so that the lower part of the nozzle is completely covered in milk (fig. 12, frothing position). The tip of the nozzle should not hit the bottom of the pitcher.

5.With the right hand slowly turn the steam knob towards the steam symbol (fig. 9 &10). Steam will push out into the pitcher. The more you open the steam knob the more steam will be released. If the steam is too powerful, turn the steam knob back to reduce the steam output. This procedure might take a little practice (see below). Once you have injected enough steam into your milk, turn the steam knob back to stop the steam output completely. Set the pitcher with the frothed milk aside. Caution: The steam pipe is hot

6.Move the coffee/steam selector back to the cup symbol. Coffee will continue brewing into the carafe.

7.Stand by and turn off the power switch when you have enough espresso in the glass carafe. Turn the coffee/steam selector to the steam symbol on the left to stop the flow.

8.Remove the carafe and pour the espresso into your latte/cappuccino cups. Add sugar to taste. Add the steamed milk and ladle some of the froth on top. Enjoy.

9.Important: Follow steps 10 and 11 in chapter 7, "Preparing Espresso".

9.HOW TO STEAM / FROTH EFFECTIVELY.

The tip of the black frothing nozzle has three visible slots on top (fig. 11). If the three slots are immersed into the milk, the steaming action will create froth (for cappuccino). If the three slots are above the milk level, the frother will inject steam into the milk without or very little froth (for latte) (fig. 12).

Recommendation: Always start with the three slots above the milk level. This way the steam first starts heating/steaming the milk. Then immerse the nozzle further into the milk to create froth. Set the steamed/frothed milk aside so that the froth can settle.

#303 specifications

The Capresso #303 is a standout coffee maker designed for the modern coffee enthusiast who seeks both quality and convenience. This machine boasts several features and technologies that enhance the brewing experience, making it a favorite among coffee lovers.

One of the main highlights of the Capresso #303 is its advanced brewing technology. The machine employs a unique brewing system that optimizes the extraction of coffee flavors, ensuring a perfect balance between strength and smoothness. The 24-hour programmable timer allows users to wake up to the rich aroma of freshly brewed coffee, providing unparalleled convenience for busy mornings.

The Capresso #303 features a stainless steel carafe, which not only adds a sleek look to any kitchen countertop but also retains heat better than traditional glass carafes. This innovative design helps keep the coffee hot for longer periods while preventing the burnt taste that can occur with heated plates. With a capacity of up to 10 cups, it is ideal for both solo drinkers and those who entertain guests.

Equipped with a built-in burr grinder, the Capresso #303 ensures that beans are freshly ground just before brewing, maximizing flavor and aroma. The grinder has several settings, allowing users to customize the grind size to match their preferred brewing style, from fine espresso grounds to coarser for French press.

Another significant feature is the machine’s dual-filter system. The Capresso #303 includes both a gold-tone reusable filter and a paper filter option, giving users the flexibility to choose their preferred brewing method. This not only contributes to a cleaner cup of coffee but also simplifies the cleanup process.

The user-friendly interface with easy-to-read controls makes it accessible for coffee lovers of all skill levels. The machine also includes an automatic shut-off feature for safety and energy efficiency.

In summary, the Capresso #303 is a versatile coffee maker that combines innovative technology with user-friendly features. Its programmable timer, stainless steel carafe, built-in burr grinder, and dual-filter system make it an excellent choice for those who appreciate high-quality coffee brewing at home. Whether you’re an aspiring barista or a casual drinker, the Capresso #303 provides an elevated coffee experience that is hard to resist.