Capresso Coffeemaker manual Filter no, Installing the Clearyl Cartridge, Insert FILTER/PRESS Steam

Page 3

•Open Front Cover and push and hold the ROTARY DIAL FILTER NO.

•Slowly turn the Dial clockwise to scroll through the following functions after FILTER NO: HARDNESS, RINSE,

POWDER QUANTITY (strength), WATER QUANTITY (cup size), TEMP, WATER PORTION, STEAM PORTION,

ECONOMY, TIME, UNIT ON, OFF AFTER, LANGUAGE, DISPLAY, INFO, EXIT.

•To exit programming choose EXIT and push the ROTARY DIAL: SELECT PRODUCT.

Programming Coffee Strength / POWDER QUANTITY Here is how to change the coffee strength for the 1-cup coffee button:

•SELECT PRODUCT, push and hold the ROTARY DIAL,

FILTER NO.

•Turn the Dial until display shows POWDER QUANTITY.

•Push the Dial to get into the function. SELECT PRODUCT.

•Push the 1-cup coffee button: STRONG.

•Turn the Dial to select (example) MILD.

•Push the Dial to confirm and turn the Dial to EXIT.

•Push the Dial: SELECT PRODUCT. From now on the

1-cup coffee button will brew MILD coffee.

I) Installing the Clearyl Cartridge

Important: Never install the cartridge before or during "First Time Ever Preparation”.

•Rinse cartridge under running water. Snap the extension tube on top of the cartridge. Insert into Water Tank recep- tion and make sure the tapered end fits snugly inside the fins. Close cartridge holder.

•Fill the tank with cold water.

Activating the Clearyl Cartridge:

You must activate the cartridge otherwise the machine cannot monitor it properly.

SELECT PRODUCT

1.Push the Rotary Dial until you hear a beep. The display shows FILTER NO

2.Push the Rotary Dial again, to enter the FILTER function. 3.Turn the Rotary Dial until the display shows FILTER YES and push the Rotary Dial to confirm. The display shows

INSERT FILTER/PRESS STEAM.

4.Place a 20 oz. container under the Steam Nozzle and push either steam button. The display shows FILTER RINSING. Initially, the water may have a slight discoloration. After 60 seconds the water flow stops. The filter is activated. The

display shows SELECT PRODUCT.

Please note: As long as the filter is activated, the water hardness setting is automatically turned off.

J. Replacing the Clearyl Cartridge

When display shows SELECT PRODUCT/CHANGE FILTER and the RINSE button lights up:

Page 2 Page 4
Image 3
Page 2 Page 4
Contents System Filling then Heating UP Machine RINSING. Select ProductSelect Product Cleaning the Frother Programming Factory SettingsChanging the Grinder Fineness Insert FILTER/PRESS Steam Installing the Clearyl CartridgeFilter no Activating the Clearyl CartridgeThen ADD TABLET/PRESS Rinse Select PRODUCT/CLEAN MachineMachine Cleaning Push the Rinse button. Insert Filter / Press SteamEmpty Grounds Agent in TANK/PRESS SteamMachine DE-SCALING Cleaning the frothXpress Plus System Using the frothXpress Plus System
Top Page Image Contents