Capresso Coffeemaker manual Changing the Grinder Fineness, Cleaning the Frother

Page 2

A LA CARTE button. Push the button and change the strength by turning the ROTARY DIAL (XMILD, MILD, NORMAL, STRONG, XSTRONG). Now push the ROTARY DIAL. During grinding turn the Dial to set the cup size.

D) Changing the Grinder Fineness

Important: You can only adjust the fineness during the actual grinding process.

1.Open the bean container lid and turn the dial while grinding: larger dots: coarser; smaller dots: finer.

2.For darker, oily beans, grind somewhat coarser. For lighter beans, grind somewhat finer.

E)Using Hot Water (factory setting is 5 oz.)

Place a cup underneath the Hot Water Spout and turn the SELECTOR SWITCH to the right. WATER PORTION. To stop the hot water flow turn the SELECTOR SWITCH to the left.

F)Frothing and Steaming with the DUAL FROTHER PLUS (Using the frothXpress PLUS system see section "N"). Important: All frother parts must be tightly connected and clean. 1. Cappuccino: One shot espresso plus ~4 oz. of steamed

and frothed milk. Metal frother sleeve DOWN.

2. Latte: One shot espresso plus ~4 to 5 oz. of steamed milk. Metal frother sleeve UP.

3. If the red lights in the steam buttons are ON, immerse the frother into a pitcher with milk and push the

PERMANENT STEAM button. DRAW OFF STEAM. Steam pushes into the milk ( if the steam buttons are not illuminated, see chapters 16.6 Operating Instructions).

a) Push the STEAM button to stop. SELECT PRODUCT. To continue steaming push the STEAM button again.

b) After steaming you can immediately brew coffee. Important: Knocking Noise during Frothing: The machine pumps water droplets for steam. This is normal.

Please note: Skim and 1% milk will produce more froth than 2% and regular milk.

To increase milk temperature, frother sleeve should be UP.

G)Cleaning the Frother

Should be done right after use, takes less than 15 sec.! Place a large cup underneath the frother. Push the PERMANENT STEAM button. After 5 sec. push the button again to stop.

H)Programming Factory Settings:

1-cup Espresso: 2 oz., strong

2-cup Espresso: 2 oz./cup, strong

1-cup Coffee: 5 oz., strong

2-cup Coffee: 5 oz./cup, strong

• All cup buttons are set to temperature HIGH.

• Hot Water: 5 oz.

• Steam Portion: 14 seconds

All other settings see chapter 5, Operating Instructions.

Image 2
Contents Select Product System Filling then Heating UPMachine RINSING. Select Product Changing the Grinder Fineness Cleaning the FrotherProgramming Factory Settings Activating the Clearyl Cartridge Installing the Clearyl CartridgeFilter no Insert FILTER/PRESS SteamPush the Rinse button. Insert Filter / Press Steam Select PRODUCT/CLEAN MachineMachine Cleaning Then ADD TABLET/PRESS RinseMachine DE-SCALING Empty GroundsAgent in TANK/PRESS Steam Using the frothXpress Plus System Cleaning the frothXpress Plus System