Fujitsu Siemens Computers S7110 manual Security Chip Setting Submenu of the Security Menu

S e c u r i t y M e n u

Security Chip Setting Submenu of the Security Menu

The Security Chip Setting submenu is used to enable or disabled the embedded security chip.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power Savings	Exit
	Security Chip Setting				Item Specific Help
Security Chip:		[Enabled]
Clear Security Chip		[Enter]
Security Chip State:		Enabled
		Activated

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 17. Security Chip Setting Submenu

F9 Setup Defaults

F10 Save and Exit

Menu Field	Options		Default	Description
Security Chip:	■	Disabled	[Enabled]	Allows you to enable or disable the security chip. Note that this is only active if
	■	Enabled		a Supervisor Password has been entered. A reboot is required after exit to con-
				figure the Security Chip correctly. Clear Security Chip option becomes select-
				able after reboot.
Clear Security Chip	–—		[Enter]	This field is not selectable until after the security chip is enabled and the system
				is rebooted.
Security Chip State:	___		–—	Display only, to indicate the state of the chip if it has been enabled or disabled.

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

27