1.Push and hold the RINSE button EMPTY TRAY/
EMPTY GROUNDS.
2.Remove and empty the tray and the used coffee container and replace. Attention: You must remove the tray for 20 seconds even if it is empty. Replace tray.
AGENT IN TANK/PRESS STEAM
3.Empty the Water Container. Remove the Dual Frother.
4.Dissolve 3 of the large square decalcifying tablets in a container with 20 oz. of water (0.6 liters) and pour the solution into the water tank. Replace water tank.
5.Place a large container under the steam nozzle and push either steam button. MACHINE
steam nozzle. After 10 minutes OPEN TAP.
7.Empty the container underneath the steam nozzle and place it underneath the hot water spout.
8.Turn the Selector switch to the hot water position. MACHINE
9.Turn the selector switch back to the cup symbol MACHINE
10.Carefully remove the used water tray, TRAY MISSING, empty it, clean and replace. Display shows FILL WATER TANK/RINSE WATER TANK.
11.Remove the water tank, rinse, fill halfway with water and replace. The display shows PRESS STEAM.
12.Place a large container under the steam nozzle and push either steam button. MACHINE
13.Empty the container underneath the steam nozzle and place it underneath the hot water spout.
14.Turn the Selector switch to the hot water position.
MACHINE DE-SCALING
15.After a short while the display shows CLOSE TAP.
16.Turn the selector switch back to the cup symbol. The machine will pump fresh water into the used water tray inside. MACHINE
17.Carefully remove the used water tray, TRAY MISSING, empty and replace. PRESS RINSE.
18.Place a container under the coffee spout and press the RINSE button. MACHINE RINSING.
SELECT PRODUCT
M)Supplies can be ordered through:
Customer Service, Mail Order Form or www.capresso.com
•Clearyl Water Filter Cartridge: #64553
•Cleaning Tablets: #62205
•Decalcifying Tablets: #61848