DCS EH-36SS, EH-30SS manual To remove filter

Page 11

Installation Instructions

5)Determine and make all necessary cuts in the wall for the ductwork. Each euro hood is shipped from the factory vented through the top. In order to vent to the rear, ductwork must run first vertical then elbow to the back. The dimensions for the duct openings are given in Fig. 02.

Install all ductwork before installing the euro hood.

6)Determine the proper location for the power supply cable as indicated in Fig. 2a & 2b. DO NOT turn on the power until installation is complete.

INSTALLING THE EURO HOOD

FIG.08

1) Remove the unit from the carton and place on a flat surface for assembly. Cover the surface to prevent accidental damage. Remove all parts including the mounting hardware before discarding the carton.

2) To remove filter:

Pull knob forward (towards you) and turn to the left at same time.

3)Remove the cover from the field wiring compartment. Remove the wiring electrical knockout using a flat-blade screwdriver. Feed the power supply cable through the electrical knockout.

4)The canopy attaches to the wall by two screws discussed earlier in the installation instructions. The canopy hangs from these screws by brackets inside the euro hood shown in Fig. 08. Before attempting to hang the canopy, you should rotate the adjustment screw marked V1 in Fig. 08 counter clockwise to extend the brackets from the canopy. Using a Phillips head screwdriver, rotate this screw counter clockwise to extend the bracket.

5)Install the damper before hanging the euro hood. The damper attaches to the euro hood by two small screws provided in the hardware package.

6)Hang the euro hood canopy from the screws. Due to the weight of the canopy, these screws must be installed into solid material! Once the canopy is hung, rotate the screw marked V1 to secure the euro hood to the wall.

NOTE: Make sure that the euro hood is securely attached to the wall! Failure to properly install could result in injury or damage to property.

(continued on page 11)

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Dynamic Cooking Systems, Inc To Reduce the Risk of a Range TOP Grease Fire Message To Our CustomersTable Of Contents Observe the Following Safety Practices & PrecautionsHood with optional Chimney SpecificationsElectrical Requirements Planning The InstallationVenting Requirements Parts Needed for Installation Installation InstructionsTools Needed for Installation 10 5/16 30 or Min 21 7/8 max Upper Wall Preparation Calculate the Duct RUN LengthTo remove filter Ductless Installation Kits Use & Care Information Wiring Diagram 30 & 36 Hoods HOW to Obtain Service ServiceDCS will not PAY for WarrantyLength of Warranty DCS will PAY forPage Part No Rev. a Litho in USA 06/2001

EH-36SS, EH-30SS specifications

The DCS EH-30SS and EH-36SS are cutting-edge electric hot-water boilers designed to deliver efficient, reliable heating solutions for residential and commercial applications. Both models reflect a commitment to advanced technology and user-friendly features, making them popular choices for modern heating needs.

At the heart of the EH-30SS and EH-36SS is the innovative electric heating system that ensures quick heat-up times and consistent temperature maintenance. These boilers utilize high-efficiency heating elements to convert electrical energy into thermal energy, allowing for rapid hot water production. The result is a reliable supply of hot water for various applications, from space heating to sanitary needs.

One of the most notable features of both models is their compact design, making them ideal for installations where space is at a premium. Their sleek stainless steel construction not only enhances durability but also adds a modern aesthetic to any setting. Users can easily place these boilers in tight areas, ensuring they do not detract from the overall appearance of the environment.

Both DCS models are equipped with advanced digital control systems that allow for precise temperature regulation. Users can set their desired temperature, and the boilers will automatically adjust to maintain it, leading to optimized energy use and reduced utility costs. Additionally, the intuitive interface provides real-time feedback on performance metrics, ensuring users can monitor efficiency over time.

Safety is paramount in the design of the EH-30SS and EH-36SS. These boilers come with multiple built-in safety features, including automatic shut-off mechanisms and overheat protection. This not only safeguards the unit itself but also provides peace of mind for users, ensuring that they can operate their systems with confidence.

In terms of installation, the EH-30SS and EH-36SS boast flexible configurations, allowing for easy integration with existing plumbing and electrical systems. They are compatible with a range of heating applications, making them versatile options for various setups.

In summary, the DCS EH-30SS and EH-36SS electric hot-water boilers stand out as exemplary models in the heating technology sector. With their efficient heating capabilities, compact design, advanced control systems, and robust safety features, these boilers offer a complete solution for anyone in need of reliable hot-water heating. Their adaptability and user-friendly nature make them a wise investment for both residential and commercial heating applications.
Top Page Image Contents