Ductless Installation Kits

Installation Instructions

7)The brackets shown in Fig. 08 are also used to adjust the level of the canopy. Using a Phillips screwdriver, rotate the screw V2 to adjust the level of the canopy.

8)Connect the Power Supply Cable to the euro hood. Attach the White lead of the power supply to the White lead of the euro hood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the euro hood with a twist-on type wire connector. Connect the Green ( Green and Yellow ) ground wire under the Green grounding screw.

9)Replace the field wiring compartment cover and the grease filters.

To install grease filter: Put the end of grease filter without the knob into the channel in the front of hood. Turn knob to the left so the lever does not protrude from filter. Insert knob end of grease filter into the channel in the back of the hood. Turn knob to the right, locking filter in place.

10)Turn the power supply on.Turn on blower and light. The euro hood controls are located on the right-hand side under the canopy. If the euro hood does not operate, check that the circuit breaker is not tripped or the house fuse blown If the unit still does not operate, disconnect the power supply and check that the wiring connections have been made properly.

The euro hood can be installed ductless in both chimney and no chimney (under cabinet) installation. To install ductless in a chimney installation, you must have the ductless chimney kit (model #ECND- 2SS) fig. 09 and the charcoal filter kit (model #ECF) fig. 11. To install ductless in a no chimney installation (under cabinet) fig. 10 you must have the charcoal filter kit fig. 11.

The ductless chimney kit consists of an upper chimney (not pictured), a lower chimney ( A) with two holes for the exhaust air, a ductless diverter (B) which sits on the canopy of the hood and diverts the air to the sides of the chimney, and two vent grates (C) to cover the holes in the lower chimney.

The charcoal filter kit contains two charcoal filters which twist onto either side of the blower inside the euro hood.

When installing ductless without the optional chimney kit, some ductwork must be installed to divert the air either out of the top of the cabinet or to the face of the soffit. The duct work can not

terminate inside the cabinet or into any dead air space.

FIG.09

FIG.10

FIG.11

EH-36SS, EH-30SS specifications

The DCS EH-30SS and EH-36SS are cutting-edge electric hot-water boilers designed to deliver efficient, reliable heating solutions for residential and commercial applications. Both models reflect a commitment to advanced technology and user-friendly features, making them popular choices for modern heating needs.

At the heart of the EH-30SS and EH-36SS is the innovative electric heating system that ensures quick heat-up times and consistent temperature maintenance. These boilers utilize high-efficiency heating elements to convert electrical energy into thermal energy, allowing for rapid hot water production. The result is a reliable supply of hot water for various applications, from space heating to sanitary needs.

One of the most notable features of both models is their compact design, making them ideal for installations where space is at a premium. Their sleek stainless steel construction not only enhances durability but also adds a modern aesthetic to any setting. Users can easily place these boilers in tight areas, ensuring they do not detract from the overall appearance of the environment.

Both DCS models are equipped with advanced digital control systems that allow for precise temperature regulation. Users can set their desired temperature, and the boilers will automatically adjust to maintain it, leading to optimized energy use and reduced utility costs. Additionally, the intuitive interface provides real-time feedback on performance metrics, ensuring users can monitor efficiency over time.

Safety is paramount in the design of the EH-30SS and EH-36SS. These boilers come with multiple built-in safety features, including automatic shut-off mechanisms and overheat protection. This not only safeguards the unit itself but also provides peace of mind for users, ensuring that they can operate their systems with confidence.

In terms of installation, the EH-30SS and EH-36SS boast flexible configurations, allowing for easy integration with existing plumbing and electrical systems. They are compatible with a range of heating applications, making them versatile options for various setups.

In summary, the DCS EH-30SS and EH-36SS electric hot-water boilers stand out as exemplary models in the heating technology sector. With their efficient heating capabilities, compact design, advanced control systems, and robust safety features, these boilers offer a complete solution for anyone in need of reliable hot-water heating. Their adaptability and user-friendly nature make them a wise investment for both residential and commercial heating applications.