DCS EH-36SS, EH-30SS manual Use & Care Information

Page 13

Use & Care Information

CONTROL PANEL

The control panel is located on the right-hand side under the canopy.

FIG.12

LIGHT ON/OFF SWITCH ( A )

On/Off switch for the halogen light. Move the switch to "1" to turn the light ON and to "0" to turn it OFF.

BLOWER ON/OFF SWITCH ( B )

On/Off switch for the blower. Move the switch to "1" to turn the blower ON and to "0" to turn it OFF.

BLOWER SPEED SWITCH ( C )

Speed control for blower. Move the switch to position 1 for LOW Speed, 2 for MEDIUM speed and 3 for HIGH speed.

For Best Results Start the euro hood before cooking and allow the unit to operate for several minutes after cooking is complete to clear all smoke and odors from the kitchen.

CLEANING

The metal grease filters should be cleaned frequently in hot detergent solution or washed in the dishwasher. Clean exterior surfaces with a commercially available stainless steel cleaner. Abrasives and scouring agents can scratch stainless steel finishes and should not be used to clean finished surfaces.

REPLACING THE HALOGEN LAMPS

FIG.13

WARNING: Before you begin, make sure that the euro hood is turned off and that the other lamps have had sufficient time to cool. Halogen bulbs burn extremely hot and serious injury could result from touching a hot bulb.

To replace the lamp, the bezel (A) around the lamp(C) must be removed. The bezel (A) is held in place by two screws (B). Remove the two screws and the bezel.Then remove the lamp and replace with a new lamp. Once the new lamp is in place, reinstall the bezel.

NOTE: This euro hood uses 20 watt Halogen Lamps.

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dynamic Cooking Systems, Inc To Reduce the Risk of a Range TOP Grease Fire Message To Our CustomersTable Of Contents Observe the Following Safety Practices & PrecautionsHood with optional Chimney SpecificationsVenting Requirements Planning The InstallationElectrical Requirements Tools Needed for Installation Installation InstructionsParts Needed for Installation 10 5/16 30 or Min 21 7/8 max Upper Wall Preparation Calculate the Duct RUN LengthTo remove filter Ductless Installation Kits Use & Care Information Wiring Diagram 30 & 36 Hoods HOW to Obtain Service ServiceLength of Warranty WarrantyDCS will PAY for DCS will not PAY forPage Part No Rev. a Litho in USA 06/2001

EH-36SS, EH-30SS specifications

The DCS EH-30SS and EH-36SS are cutting-edge electric hot-water boilers designed to deliver efficient, reliable heating solutions for residential and commercial applications. Both models reflect a commitment to advanced technology and user-friendly features, making them popular choices for modern heating needs.

At the heart of the EH-30SS and EH-36SS is the innovative electric heating system that ensures quick heat-up times and consistent temperature maintenance. These boilers utilize high-efficiency heating elements to convert electrical energy into thermal energy, allowing for rapid hot water production. The result is a reliable supply of hot water for various applications, from space heating to sanitary needs.

One of the most notable features of both models is their compact design, making them ideal for installations where space is at a premium. Their sleek stainless steel construction not only enhances durability but also adds a modern aesthetic to any setting. Users can easily place these boilers in tight areas, ensuring they do not detract from the overall appearance of the environment.

Both DCS models are equipped with advanced digital control systems that allow for precise temperature regulation. Users can set their desired temperature, and the boilers will automatically adjust to maintain it, leading to optimized energy use and reduced utility costs. Additionally, the intuitive interface provides real-time feedback on performance metrics, ensuring users can monitor efficiency over time.

Safety is paramount in the design of the EH-30SS and EH-36SS. These boilers come with multiple built-in safety features, including automatic shut-off mechanisms and overheat protection. This not only safeguards the unit itself but also provides peace of mind for users, ensuring that they can operate their systems with confidence.

In terms of installation, the EH-30SS and EH-36SS boast flexible configurations, allowing for easy integration with existing plumbing and electrical systems. They are compatible with a range of heating applications, making them versatile options for various setups.

In summary, the DCS EH-30SS and EH-36SS electric hot-water boilers stand out as exemplary models in the heating technology sector. With their efficient heating capabilities, compact design, advanced control systems, and robust safety features, these boilers offer a complete solution for anyone in need of reliable hot-water heating. Their adaptability and user-friendly nature make them a wise investment for both residential and commercial heating applications.
Top Page Image Contents