Bogen PCM2000 System Programming, Remember to press the # key after you enter a Feature Code

Page 33

SECTION II - PROGRAMMING

SYSTEM PROGRAMMING

System programming lets you set certain PCM options and tone features using the DTMF keys of a telephone. It also lets you program pag- ing zone groups and signaling zone groups.

All programming is accomplished through the TEL LINE jack on the PCMTIM module regardless of the telephone interface used.

Note:To simplify initial programming, it is recommended that you use the Loop Start Trunk configuration with a single-line 2500-series telephone or your Butt Set connected to the TEL LINE input.

You do not need to program the system to set the zones.The system is ready from the factory to access individual zones and All-Call.

To program the PCM2000 system, follow these instructions:

PCM

CPU

S1

S2 SYS

S3 ID

S4

01

POWER

RUN

PROGRAM

1. Remove the switch lock on the PCMCPU module and place the PROGRAM/RUN switch to the PROGRAM position (down).The green LED will illuminate.

2.Access the PCM2000 system (either use a single 2500-line telephone or butt set or dial the paging access number from the telephone sys- tem).

3.You will hear 3 beep tones indicating access to the programming mode.

4. Dial the Feature Code for the option you wish to program. (See Feature Codes and Defaults list.)

Note:After you have entered a Feature Code (and any other data), you must press the [#] key to enter it into the system. If the system accepts the code (and data), you will hear a short double beep confirming that the data has been stored in the system.

Continue with the next Feature Code immediately after the confirming double beep.

If the information is not accepted, you will hear a busy tone. In this case, you should hang-up, check the code and the data, then re-access the system and try again.

5.Once you have finished programming, you must first hang-up the programming phone and then place the Program/Run switch in the Run position.The green LED will go out. Replace the switch lock.

Remember to press the [#] key after you enter a Feature Code.

34

Page 32 Page 34
Image 33
Page 32 Page 34
Contents PCM2000 Configuration Guide Contents Section I Setup for Configuration Switch Settings InstallationTesting your System Connecting the Paging AmplifierPBX Assembling Modules Pcmtim to Pcmcpu and to Pcmzpm Loop Start Installation Ground Red and green Station Access Installation Satellite Assembly #1 Assembling Master Modules Pcmtim to Pcmcpu and to Pcmzpm Configuration Extended Paging SystemBogen Connecting Telephone System Paging Output to the Pcmtim Configuration TWO-WAY Talk Back Paging SystemSatellite Assembly #1 Assembling Satellite Modules Pcmcpu to Pcmzpm Configuration TWO-WAY Talk Back Extended Paging SystemZone C Connecting the Paging Amplifiers Connecting Self-Amplified SpeakersAssembling Modules Setup for Configuration 10 6 25/70V Connecting Amplifiers Switch and Control SettingsVAR1 Configuration Microphone Override Assembling Modules and Connecting the AmplifierConnecting Optional Equipment TAM B Connecting the DFT120 to the Pcmtim Module Connecting the Tamb Module to the DFT120Prohold Configuration Emergency Voice Announcement Override Shure Operation Configuration Dtmf Microphone Zone PagingPcmcpu Switch Settings Connecting the BGM SourceTesting the System Prepare System for OperationRelay Power Supply 12VDC Configuration Relay Driver OutputSystem Programming Remember to press the # key after you enter a Feature CodeEM/SC Feature Codes and DefaultsClock Set Clock SyncTime Trigger Setup Tone in Program Mode Only Reset DefaultZone #’s Master Satellite AppendixSpring Street, Ramsey, NJ 07446 U.S.A
Related manuals
Manual 2 pages 49.44 Kb

PCM2000 specifications

The Bogen PCM2000 is a powerful and versatile public address (PA) system designed to deliver high-quality sound in a range of environments. Whether being used in schools, offices, retail spaces, or large auditoriums, the PCM2000 is engineered to meet diverse audio requirements while ensuring user-friendly operation.

One of the standout features of the PCM2000 is its modular design. This allows users to customize the system to fit their specific needs by adding or removing components. The system is built around a multi-channel amplifier, providing flexibility in configuring the sound output. The PCM2000 supports a range of audio sources, including microphones, CD players, and other auxiliary devices, making it adaptable for various applications.

The PCM2000 incorporates advanced digital signal processing (DSP) technology, which enhances overall audio quality. This technology enables features such as equalization, compression, and limiting, ensuring that the sound is clear and consistent across different environments. The system's DSP capabilities also help to minimize feedback and distortion, providing a professional-grade audio experience.

Another significant characteristic of the Bogen PCM2000 is its user-friendly interface. It features a simplified control panel that allows for intuitive operation. Users can easily adjust volume levels, select input sources, and manage other functionalities without extensive training. Additionally, the system can be integrated with existing networks, allowing for remote control and monitoring via a computer or mobile device.

The PCM2000 is highly reliable and built for long-term performance. It features a rugged construction designed to withstand the rigors of daily use, ensuring durability in commercial settings. Moreover, its efficient thermal management keeps the system cool during extended operation, reducing the risk of overheating and prolonging its lifespan.

The PCM2000 meets various safety and compliance standards, ensuring it is suitable for a wide array of installation environments. Its ability to interconnect with other systems, including fire alarms and emergency notification systems, makes it a critical component for comprehensive safety protocols.

In summary, the Bogen PCM2000 is an advanced public address system that combines modular design, sophisticated DSP technology, and user-friendly operation. Its reliability and versatility make it an excellent choice for any setting requiring clear and effective audio communication.
Top Page Image Contents