Wind Crest CTG304D, CTG365D Electronic Ignition, Grates, Control Knob, Burner Base, Burner Head

Page 10

Electronic Ignition

Each burner has an igniter that sparks when the burner is turned on, or during re-ignition if the flame is extinguished. When a flame is present the igniter will stop sparking. If a cross draft is present the flame can be affected and some sparking can occur. This is normal.

The igniter can get dirty due to normal cooking splatter or spills. This may cause nuisance sparking. The igniter can be cleaned by using a Scotch Brite cleaning pad to clean the igniter disk. Do not touch the igniter on the burner if the control is in the ON position. Hold the pad against the igniter tip and using light pressure rotate the pad in a circular motion. A few rotations are usually sufficient to clean the surface.

If a burner does not ignite in approximately 4 seconds, check the positioning of the burner head to be sure the tabs and notches are properly aligned.

Grates

Grates are to be properly installed onto cooktop.

Model CTG304D Has two symmetrical grates. Position side by side into recessed area of cooktop over burners.

Model CTG305D Has two non-symmetrical grates. Position side by side into recessed area of cooktop over burners. Center burner section of grates match each other over center burner.

Model CTG365D Has three grates; two larger symmetrical grates and one smaller center grate. Position larger grates into recessed area of cooktop on each side of control area. Smaller center grate fits between the larger grates.

CAUTION: THE GRATES ARE HEAVY. USE BOTH HANDS AND SPECIAL CARE WHEN LIFTING. PROVIDE SURFACE PROTECTION WHEN PLACING ON COUNTERTOP.

CLEANING AND GENERAL CARE

CAUTION: CONTROLS SHOULD BE OFF AND SURFACES COOL BEFORE CLEANING.

Control Knob

When in place on cooktop, wipe with a damp cloth. A mild soap solution can be used. Do not soak. If removed and cleaned, be sure the knob has dried fully before reinstalling.

DO NOT FORCE KNOB ONTO CONTROL STEM. ALIGN THE FLAT ON STEM WITH THE FLAT ON KNOB AND GENTLY PUSH INTO PLACE.

Burner Base

Use cloth or Scotch Brite pad dampened with a water and detergent solution. Rub in circular motion.

AVOID SCRATCHING STAINLESS STEEL WITH SCOTCH BRITE PAD.

Burner Head

Scotch Brite pad dampened with a water and detergent solution. Rub in circular motion.

AVOID USING HARSH SCOURING PADS AND ABRASIVE CLEANERS.

If parts become clogged, clean using a paper clip. Do not use toothpick, which can break and clog the parts.

10

Image 10
Contents BOX 714 482-2320 714 482-2337 FAXDear Customer For your safety Safety Practices to Avoid Personal Injury Do not store flammable materials on or near the cooktop Before Using Your Cooktop for the First Time Controls & Burners Model CTG365D Grates not shownControl Operation Control Knob Electronic IgnitionGrates Burner BaseIgniter Stainless Steel877 Page

CTG305D, CTG304D, CTG365D specifications

Wind Crest is renowned for its exceptional range of cooking appliances, and among its most popular offerings are the CTG304D, CTG365D, and CTG305D models. Each of these cooktops stands out for their innovative design, advanced technology, and a plethora of features that cater to the needs of modern home chefs.

The Wind Crest CTG304D is a 30-inch gas cooktop that boasts four burners, making it a perfect choice for those who enjoy culinary versatility. It features a high-output burner that delivers rapid heating, ensuring quick cooking times, while the simmer burner is ideal for preparing delicate sauces. The cooktop is equipped with continuous grates made from cast iron, allowing for easy movement of pots and pans between burners. Additionally, the CTG304D is designed with an automatic electronic ignition system, enhancing convenience and safety during use.

Moving on to the CTG365D, this 36-inch model offers a more extensive cooking surface with five burners, catering to larger meals and multiple dishes simultaneously. It incorporates a dual-ring burner that provides adjustable flame control, allowing users to achieve precise temperatures for various cooking methods. The stainless steel surface not only adds a modern aesthetic but is also easy to clean. Furthermore, the CTG365D features seamless edge design that prevents spills from seeping underneath, making maintenance hassle-free.

The CTG305D is another notable entry in Wind Crest’s lineup. This 30-inch model is designed for those seeking both form and functionality. Featuring five burners, including a powerful high-heat burner and a gentle simmer burner, it offers excellent versatility. The grates are made from durable materials that can withstand high temperatures while providing stability for your cookware. The cooktop’s intuitive control knobs are front-mounted, ensuring ease of access while cooking, and the unit also boasts a sleek design that can complement any kitchen décor.

Across these models, Wind Crest incorporates advanced safety features, including a flame failure device that automatically shuts off the gas supply if a flame goes out. This ensures peace of mind while cooking, allowing you to focus on creating delicious meals.

In summary, the Wind Crest CTG304D, CTG365D, and CTG305D cooktops offer a blend of style, functionality, and advanced technology. With their powerful burners, easy-to-clean surfaces, and thoughtful safety features, these cooktops are designed to meet the demands of any culinary enthusiast. Whether you are a novice cook or a seasoned chef, these models provide the tools necessary to elevate your cooking experience.