Maintenance – Hood and Filter Cleaning
www.zephyronline.com
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning it is recommended that you use
Do not use any product containing chlorine bleach. Do not use “orange” cleaners.
Metal Mesh Filters
The metal mesh filters installed by the factory are intended to filter out residue and grease from cooking. They need not be replaced on a regular basis but are required to be kept clean.
After 30 hours of use the letter “A” will flash on the control screen indicating time to clean the metal mesh filters. Refer to instructions on page 13 on how to reset the indicator. Filters may need to be cleaned more depending on cooking habits.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if heavily soiled.
Dry filters and
Removing Metal Mesh Filters
1.Push in on spring loaded handle
2.Pull down on filter hande to remove filter
Should filters wear out due to age and prolonged use, replace with following part number:
Hood Model: | Part No. | Qty to Order |
50200011 | 2 |
Metal Mesh Filter Dimensions:
10 1/8in. x 12 9/16in. 253mm x 314mm
14