Telenetics Communications and Interface Cabinet Antenna installation manual Installing the Antenna

Page 10

Installing the Antenna

Use the following procedure to assemble the Yagi antenna:

1.Mount the mast onto a wall using the supplied bracket and screws.

2.Mount the brass clamp, as shown in Figure 2.

Figure 2. Mounting the Brass Clamp

3.Align the antenna with the brass clamp.

4.Use the two supplied flat washers, lock washers, and screws to secure the antenna to the brass connector, as shown in Figure 3.

Figure 3. Completed Antenna Assembly

5.To prevent moisture from entering the OMEGA, route the antenna cable through the conduit hole at the bottom of the OMEGA.

6.Open the OMEGA enclosure and connect the antenna cable to the OMEGA transceiver.

6

OMEGA Antenna Installation Manual

Image 10
Contents OMEGA Page Page Page Safety Precautions PrefaceGrounding Considerations Technical AssistanceParts List Chapter Elevated-Feed AntennaChoosing a Location Assembling the AntennaChapter Yagi Antenna Installing the Antenna Mounting the Brass ClampWall-Mounted Yagi Antenna