34
initio
®
 Follow the instructions on the screen until you are asked to specify a SCSI driver.
3Insert the INI-9XXXU/9XXXUW DRIVER DISK 1 into your local floppy disk drive, and
press <ENTER>.
 Select: Initio INI-9XXXU/UW PCI SCSI Host Adapter
4The Initio host adapter driver is now installed
The on-screen instructions will continue for a complete installation of Windows NT.
Refer to your Windows NT System Administrators Guide for completion of the operating
system installation procedure.
Installing a new Windows NT system from a Bootable CD
For computer systems installing or upgrading to Windows NT from a bootable CD,
these instructions will guide you through the INI-9XXXU/9XXXUW host adapter driver
installation. The Windows NT driver will be found on the INI-9XXXU/9XXXUW DRIVER
DISK 1. It is important that the hardware has been installed successfully before
proceeding further.
1Boot your system from a Windows NT CD.
2When initial boot screen (Black and white screen prior to blue screen) shows the
message, Setup is inspecting your computers hardware configuration, press F6.
3A setup screen will appear asking which drivers you wish to use.
4Press the appropriate key to add driver and select other.
5Windows NT will prompt you for a manufacturers supplied disk.
6Insert the Initio manager set floppy (marked INI-9XXXU/9XXXUW DRIVER DISK 1) and
press ENTER. The host adapter should be recognized by Windows NT and the driver will
be allowed to load. The operating system will continue loading and should recognize the
hard drives.
Microsoft Windows NT Driver Installation