32
initio
®
2If you are installing Windows NT from a CD version, locate the Windows NT Setup
Disk for CD-ROM Installation. Make a backup copy of this diskette before installa-
tion.
3Insert the backup Windows NT Setup disk into drive A: and turn on your computer.
4Follow the instructions on the screen until you come to a window titled:
WINDOWS NT WORKSTATION SETUP (for servers, it will read WINDOWS NT SERVER
SETUP).
 Press ENTER to continue setting up Windows NT.
 Select S to skip mass storage detection.
 Select S to configure additional SCSI adapters.
5When prompted by the Windows NT installation, scroll down the list and select
OTHER (Requires disk provided by a hardware manufacturer) from the
list of Additional SCSI Adapters. A message will appear on screen stating to:
 Remove diskette in drive A and set it aside.
 Insert INI-9XXXU/9XXXUW DRIVER DISK 1 and press <ENTER>.
Select: Initio INI-9XXX SCSI Host Adapter and press <ENTER>.
6The Initio host adapter driver is now installed The on-screen instructions will
continue for a complete installation of Windows NT. Refer to your Windows NT
users manual for completion of the operating system installation procedure.
Adding or updating the Initio driver to an existing WindowsNT system:
For computer systems using other SCSI host adapters or an IDE drive to provide the
system boot routine, these instructions will guide you through the INI-9XXX host
adapter driver installation. The Windows NT driver will be found on the INI-9XXXU/
9XXXUW DRIVER DISK 1. It is important that the SCSI bus hardware and Windows NT are
installed and configured before proceeding further.
1Once a Windows NT session is established, use your installed mouse or the appropriate
key strokes to select MY COMPUTER from the Main Desktop. Execute the following
steps:
 Select CONTROL PANEL from within the MY COMPUTER group.
 Select SCSI ADAPTERS from within the CONTROL PANEL group.
2Select the DRIVERS tab from within the SCSI ADAPTERS group.
 In the DRIVERS window, select ADD
3In the INSTALL DRIVER window, select HAVE DISK....
Microsoft Windows NT Driver Installation