Installation Instructions, Vertical Mounting

INSTALLATION INSTRUCTIONS

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

SECTION 1 Preparing for Fan Installation

1.When selecting fan mounting location, the following criteria should be considered:

a)Mounting to minimize noise generated by fan operation: Mounting the fan as far as possible from the intake point will minimize fan operating noise from being transmitted back through the duct work. If the fan is to be used as a booster for moving the air between two rooms, a central point along the duct may be optimal. Insulated flexible type duct work (recommended for all bathroom exhaust applications) will result in much quieter operation. It is recommended that a minimum 8' of insulated flexible ducting be used between any exhaust grill and fan for low noise level.

b)Service accessibility: Fan location should allow sufficient access for service.

SECTION 2

Installing the Fan

1.Using the 1" wood screws provided, attach the fan mounting bracket to a support beam at the selected location (Figure 1).

Vertical Mounting	Horizontal Mounting
	Bracket
Bracket	or
Stud
Figure 1	Joist

NOTE: Fan mounting can be at any point along the duct and in any angle, however, vertical mounting is recommended to reduce condensation buildup in the fan. If a horizontal installation is necessary and condensation buildup may pose a problem, wrap insulation around the fan to minimize buildup.

2.Attach fan to the mounting bracket with the three 7/16" sheet metal screws provided, making sure the wiring box is positioned for easy access (Figure 2).

Fan

Stud

Screws

Figure 2	Bracket

NOTE: Bracket is provided with rubber vibration isolation grommets to prevent the transmission of sound through the structure. Be careful not to over tighten. Also, care should be taken not to strip the plastic housing. Screws are self tapping and do not require pilot holes. Pilot holes no larger than 1/16" can be used to ease the installation however.

SECTION 3

Installing Supply/Exhaust Grill

1.Select the grill mounting point within the area to be ventilated that does not interfere with a ceiling joist. To ease installation, locations of framing beams within the walls or joists supporting the ceiling should be considered. Collar/damper is provided with a perforated hanging strap for attachment directly to a beam or joist. Allow sufficient space between the collar/damper and the beam to attach the duct work. If the location of the grill does not allow direct attachment, a cross-member mounted to the framing should be used.

2.Bend the mounting straps attached to the collar outward so they are straight across (Figure 3).

	Mounting
	Strap
Mounting
Strap
Figure 3	Collar/Damper
Figure 3

SECTION 4

New Construction

1.Install the collar/damper in the selected location using the provided 1" wood screws through the mounting strap. The mounting height is determined by the thickness of the final wall/ceiling material. Ensure that the edge of the collar/damper will be flush with the finished wall/ceiling material (Figure 4).

5S7635036 New 9-06

www.airkinglimited.com

2 of 12

AIF6Y, AIF4X, AIF8X, AIF10X, AIG4 specifications

Air King has established itself as a leader in the ventilation and air quality industry, with a diverse range of fans designed to meet various needs. Among its robust lineup, models AIF8X, AIF4X, AIK14X, AIG4, and AIK16X stand out for their unique features and advanced technologies, catering to different environments from residential to commercial settings.

The Air King AIF8X is a powerful yet compact fan designed for high airflow efficiency. With a 3-speed motor, it allows users to customize their airflow according to specific requirements. The fan’s durable steel construction ensures longevity, while its easy-to-install design makes it a favorite among DIY enthusiasts and professional contractors alike.

Next in line is the AIF4X model, which features a lightweight and portable design. It is ideal for small spaces where flexibility is essential. The AIF4X is equipped with a built-in carry handle and an adjustable tilt head, allowing users to direct airflow where needed. Its energy-efficient motor operates quietly, making it suitable for use in offices or bedrooms without disturbing the peace.

The AIK14X is engineered with advanced noise-reduction technology, making it one of the quietest fans available in its category. This model is particularly popular in environments requiring concentration, such as libraries or study rooms. Its sleek design is complemented by a powerful airflow capacity, making it effective in cooling larger spaces without the usual noise associated with high-output fans.

The AIG4 fans are well-known for their corrosion-resistant properties, making them an excellent choice for humid environments like bathrooms or kitchens. The AIG4 boasts a powerful motor and features integrated timers, which automatically shut the fan off after a predetermined time, promoting energy efficiency.

Finally, the AIK16X merges functionality with modern design. It features an adjustable wall-mounting option, making it perfect for areas where floor space is limited. Its multi-speed operation ensures that users can tailor airflow for comfort during different seasons.

In summary, Air King’s AIF8X, AIF4X, AIK14X, AIG4, and AIK16X fans showcase a blend of innovation, user-centric design, and reliability. Whether for personal comfort or commercial applications, these models deliver superior performance, ensuring that you enjoy a fresh and well-ventilated environment.