Zephyr ASL-E48ASX, ASL-E42ASX Installation Power Supply Connection, General

Installation - Power Supply Connection

GENERAL

•Carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations.

POWER SUPPLY CONNECTION

For connection to the power supply refer to the following:

8. Break out the partially pre-cut circle in the cover of the mains power connection en- closure using a flat head screwdriver. Fig. 15

9. Remove the power supply cover by un- doing the (2) screws. Fig. 16

10. Connect the supply conduit to the cover, then connect the hood to the power sup- ply by making the following connections. Fig.17:

BLACK = L line

WHITE = N neutral

GREEN / YELLOW = G ground

- A double-pole switch properly rated must be installed to provide the range hood po- wer supply disconnection.

- Connect the electrical conduit to the Field Wiring Compartment using listed onduit fittings.

- Carry out the power supplly connection in accordance with the national electric code, ANSI/NFPA 70-1999.