Zephyr ASL-E48ASX, ASL-E42ASX installation instructions Maintencance, Maintenance

Page 20

www.zephyronline.com

Maintencance

MAINTENANCE

It is recommended to operate the appliance prior to cooking. It is recommended to leave the appliance in operation for 5 minutes after cooking is completed in order to completely eliminate cooking vapors and odors. The proper function of the range hood is conditioned by the regularity of maintenance.

The decorative mesh filters capture the grease particles suspended in the air and are therefore subject to clogging because of frequent use. In order to pre- vent a fire hazard, it is recommended to clean the filter a minimum of every 2 months or when instructed by the Metal Filter Clean indicator on the range hood controls. Clean the range hood by carrying out the following instructions:

- Remove the filters from the range hood and wash them in a solution of water and neutral liquid detergent, leaving to soak.

- Rinse thoroughly with warm water and leave to dry.

- Filters may also be washed in the dishwasher at the lowest setting.

The filters may alter in color after several washes but is not cause for replace- ment.

Clean the blower and other surfaces of the range hood regularly using a cloth moistened with denatured alcohol or non abrasive liquid detergent.

- 20 -

Image 20 Contents
Range Hood Installation instructions ASL-E42ASX ASL-E48ASXHotte PER Cuisine Notice d’utilisation...Pag Contents InstallationPlease Read Entire Instructions Before Proceeding Safety instructionsImportant Safety Instructions For Residential USE only Installation Instructions MAY List of Materials Ducting Calculation Sheet Maximum Duct LengthHood Specifications Installation Internal Blower For external and in-line blower preparation please turn toHood is now ready to be installed on the wall Installation External & In-Line Blower Preparation Installation External & In-Line Blower Preparation Installation Ducting Options Installation Mounting the Range HoodMounting Heights Mounting to the Ceiling Installation Mounting the Range Hood Insert the bottom support frame into the top support frame General Installation Power Supply ConnectionPower Supply Connection Installation Power Supply Connection Maintenance MaintencanceOptional Accessories List of Parts and AccessoriesDescription Hood PART# Replacement Parts Page 3LIK0510