Waterford Precision Cycles Glass Island Hood manual Control Panel, Specifications, Ventilation

Page 4

CONTROL PANEL

The control panel is situated on the front of the hood and comprises of a digital display and 5 touch con- trol switches with the following functions: (See Fig.9)

Fan ON/OFF Switch

Reduces the speed of the fan (Min speed 1)

Digital display,displays the speed of the fan 1-6

Increases the speed of the fan (Max speed 6)

OFF delay switch, press once display flashes, fan switches off automatically after 15 minutes

Light ON/OFF switch

SPECIFICATIONS

The electronic controls on your ducting cooker hood have multiple functions-features:

Motor on-off Function

The motor is turned on and off by pressing push-but- ton no.1. When you turn on the cooker hood it auto- matically starts running at the third speed.

Timer Function

This function permits you to program your cooker hood so that the motor and lights turn off automati- cally 15 minutes after you have activated this func- tion. To program press push-button no.4. At the bot- tom on the right of the display a point will flash indi- cating that the timer function is activated.

Lights on-off Function

To turn the lights on and off press push-button no. 5.

Specific Features

The electronic controls provided on your ducting cooker hood have advanced features to facilitate maintenance and correct utilisation.

Prompt-Clean Metal Filters

After every 30 hours of use a microprocessor, prompts the user that it is time to clean the metal grease filters to guarantee better ducting perform- ance and to improve hygiene. This prompt is indicat- ed by the letter “A” which flashes on the display.

To delete this prompt, once the filters have been cleaned and with the cooker hood off (not powered), maintain push-button 2 pressed for more than 5 sec- onds. When you press this push-button the letter “A” will come up on the display and then disappear after 5 seconds. The microprocessor zeros the number of hours and starts a new count from zero until reach- ing 30 hours prompting this maintenance procedure.

VENTILATION

If there is an appliance fitted in the vicinity which requires air for combustion, additional air vents will be required to alleviate the possibility of spillage of products of combustion, from the appliance/flue while the fan is in operation. Refer to B.S. 5440 Part 2 & I.S. 813.

Where such an installation exists a test for spillage should be carried out with all appliances requiring air for combustion and all extraction fans running at maximum rate, (i.e. tumble dryers, extraction fans) with all external windows and doors closed.

If spillage occurs following the above operation, an additional air vent of sufficient size to prevent this occurrence should be installed.

FITTING INSTRUCTIONS

1.Fix the ceiling bracket to the ceiling, making sure that the riveted brackets for fixing the stainless steel casing are to the side. Adjust the chimney section to the required length. See Fig. 2 & 2a.

2.Slide the stainless casing over the chimney section keeping vents to the side. See Fig.3.

3.Mount the chimney section on the ceiling bracket, note tabs must fit into the slots on the ceiling bracket to hold this section in place while fitting the fixing screws. See Fig.4.

4.Fit 4 fixing screws one in each corner. See Fig. 5. Fit the glass onto the hood section using clamps provided (See Fig 6). Connect the plug and socket between the chimney and the hood section.

5.Lift the glass section into place, the clip on either side will hold hood in place while fitting the fixing screws. See Fig 7.

3

Image 4
Contents An AGA Company Electrical Connection Grease FilterGeneral Guidelines Maintenance InstallationCleaning Electrical ConnectionSpecifications Control PanelVentilation Fitting InstructionsRiveted Brackets Vents Clips to hold Hood Glass Glass in place Dimensions Warranty

Glass Island Hood specifications

The Waterford Precision Cycles Glass Island Hood represents a pinnacle in cycling technology, combining advanced materials with innovative design features to enhance both performance and comfort. As cyclists seek to optimize their riding experience, the Glass Island Hood serves as a standout component in this quest.

One of the standout features of the Glass Island Hood is its lightweight construction. Utilizing cutting-edge materials, this hood significantly reduces overall bike weight without compromising durability. The use of high-strength, lightweight carbon fiber not only decreases weight but also enhances the responsiveness of the bike, allowing for quicker acceleration and better handling.

Another notable characteristic of the Glass Island Hood is its aerodynamic design. Engineers at Waterford Precision Cycles have meticulously crafted the hood to minimize drag while maintaining an aggressive riding position. This sleek profile helps cyclists maintain higher speeds with less energy expenditure, making it ideal for both competitive riders and enthusiasts aiming to improve their overall performance.

Comfort is paramount in long-distance cycling, and the Glass Island Hood excels in this area. The ergonomically shaped hood ensures a natural hand position, reducing stress on the wrists and enhancing grip. Additionally, the integration of vibration-damping technologies helps to absorb road shock, providing a smoother ride over rough terrain. This characteristic allows cyclists to ride longer distances without experiencing discomfort, ultimately making for a more enjoyable cycling experience.

Moreover, the Glass Island Hood boasts a customizable fit, accommodating a range of hand sizes and preferences. With an adjustable design, riders can easily personalize their setup to match their individual needs, ensuring optimal control and comfort.

Waterford Precision Cycles has incorporated advanced technologies into the Glass Island Hood, including smart integration capabilities for accessories. Riders can seamlessly attach lights or other gadgets, enhancing safety and functionality on their rides.

In summary, the Waterford Precision Cycles Glass Island Hood is a transformative cycling accessory that blends lightweight materials, aerodynamic design, and comfort-enhancing technologies. It is expertly crafted for cyclists who demand performance, style, and unparalleled riding experience. As cycling continues to evolve, the Glass Island Hood sets a new standard for what cyclists can expect from their gear.