Addison Electric Stove
Electrical Wiring Diagram
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes.
If repairing or replacing any electricial component or wiring, the original wire routing, color coding and securing locations must be followed.
3
2
SWITCH ON/OFF
1 BLACK
5 WHITE | 8 BLACK | 2 BLACK |
4
10
10 11
5
6 |
2 BLACK |
10 11
FAN
MOTOR
BREAKER CIRCUIT
HEATER
ELEMENT
7
3 BLACK
6 WHITE
BLACK
FLAME
MOTOR
BLACK
1
7 WHITE
9
8
1. | 120v Motor AC | 5. | Light Socket w/ Wiring Assy (2 Lamp) | 9. | Bushing Strain Relief |
2. | Rocker Switch | 6. | Light Bulb 60 W | 10. | Nylon Cable Tie 6¹⁄₈ Black |
3. | Thermostat | 7. | Breaker Circuit Manual Reset | 11. | Bushing Snap Hole |
4. | Fan/Heater | 8. | Power Cord | 12. | CFM Corporation Factory Wire |
HS103
Operating Instructions
Main On/Off Switch
Heater Control
The On/Off switch supplies power to all of the functions of the stove. It is located on the top of the firebox at the rear of the unit.
WARNING: During any service of this appliance, the power to the unit must be turned off. It is not acceptable to use the “On/Off” switch to meet this requirement.
ON/OFF | Temperature |
Switch | |
| Control |
| HS101 |
Fig. 4 Control locations at the top rear corner of the stove.
The Heater Control acts to turn the heater on and off as well as setting the comfort level in the room. Turning the knob clockwise from the off position will place the heater into operation. The further the knob is rotated clockwise, the higher the set point temperature. Turning the knob counterclockwise will lower the set point temperature. Turning it all the way counterclockwise will turn the heater function off.
10004324 | 7 |