SWR Sound owner manual Workingmans 2X10C Front Panel Features, Specifications

Page 3

WORKINGMAN'S 2X10C - FRONT PANEL FEATURES

Discrete Solid State Front End

Balanced XLR Output

Tuner Out Jack

High and Low Sensitivity 1/4" Input Jacks

Gain Control with LED peak clipping indicator

Aural Enhancer Control

Bass Level Control

Lo Mid Level Control

Mid Level Control

Hi Mid Level Control

Treble Level Control

Effects Blend Control

Variable Limiter with Pull Defeat Option

Master Volume Control

Speakers (both internal and extension) On/Off Switch

Stereo Headphones Jack

Single Open Rack Space for effects unit of your choice

WORKINGMAN'S 2X10C - REAR PANEL FEATURES (chassis and cabinet)

Side-Chain Effects Loop (Effects Send and Effects Return 1/4" jacks)

Extension Speaker 1/4" Output Jack

Speaker Fuse

Line Fuse

AC Power Cord Receptacle

Internal Speaker On/Off Switch

3-Way Tweeter Mode Selector Switch (Full Range, -6db, Off)

SPECIFICATIONS

Power Ratings (minimum)

260 Watts @ 8 ohms (internal cabinet)

400 Watts @ 4 ohms (with 8-ohm extension cabinet)

Minimum Impedance (amplifier) 4 ohms

Frequency Response (power amplifier) -3dB @ 20 Hz and 40 kHz

Speaker Complement

(2)10" custom designed cast-frame SWR drivers

(1)LeSon TLX-1 Piezo Tweeter

WORKINGMAN’S 2X10C • 3

Image 3
Contents Workingman’s 2X10C Introduction Specifications Workingmans 2X10C Front Panel FeaturesWorkingmans 2X10C Getting Started Cabinet Construction and FeaturesPASSIVE/ACTIVE Input Jack Balanced D.I. XLR OutputTuner OUT Input JacksGain Control Preamp Clip LEDAural Enhancer Midrange Controls Using the 5-BAND Graphic EQ Section Bass ControlWorkingmans 2X10C 5-BAND Graphic EQ Section OverviewLimiter Active LED Effects Blend ControlVariable Limiter Control with defeat option Defeating the Limiter CircuitPower ON/OFF Switch Master Volume ControlSpeakers ON/OFF Switch Headphones Jack stereo onlyEffects Loop for outboard effects devices Effects SendEffects Receive Extension Speaker Output Section Combo Cabinet JACK/PLUG AssemblyHOW Impedance Affects Power Ratings Workingmans 2X10C Power Amplifier Minimum Impedance RatingsYour rig Workingmans 2X10C Power Delivery Capabilities Power RatingsInternal Speaker Mode Switch Extension Speaker Output JacksSpeaker Fuse Cord Receptacle Workingmans 2X10C Suggested SettingsTweeter Mode Switch Line Fuse A/C or Mains FuseWORKINGMAN’S 2X10C WORKINGMAN’S 2X10C Limited Warranty

2X10C specifications

The SWR Sound 2X10C is a powerful and versatile bass cabinet designed for both studio sessions and live performances. With its compact size and lightweight design, it is an ideal choice for musicians seeking portability without sacrificing sound quality. The cabinet features two 10-inch custom-designed speakers, specifically engineered to deliver a balanced tonal range and impressive low-end response.

One of the standout features of the 2X10C is its high power handling capability, allowing it to handle up to 400 watts RMS. This ensures that even when pushed to its limits, the cabinet maintains clarity and punch, crucial for any live show or recording environment. The cabinet is also equipped with a high-efficiency horn tweeter, which enhances the higher frequencies and provides a sparkling top-end that complements the rich tones produced by the 10-inch woofers.

The cabinet utilizes SWR's proprietary technologies to enhance performance. The "Bass Reflex" design features strategically positioned ports that help to eliminate unwanted air turbulence while maximizing low-frequency response. This design not only promotes deeper bass tones but also allows the cabinet to remain lightweight, making it easier for musicians to transport.

Another key characteristic of the SWR 2X10C is its rugged construction. Built from durable materials, the cabinet is designed to withstand the rigors of both touring and frequent use. Reinforced corners and a heavy-duty grille protect the speakers from potential damage, ensuring the longevity of the cabinet.

For connectivity, the 2X10C comes with dual 1/4-inch input jacks, enabling easy integration with various amplifiers and allowing for daisy-chaining additional cabinets if more sound output is required. The cabinet is compact enough to fit into most environments, making it a versatile option for a range of musical genres.

In summary, the SWR Sound 2X10C combines advanced features, innovative technology, and robust build quality, making it an exceptional choice for bass players looking for a reliable cabinet that delivers impressive sound across various settings. Whether in a rehearsal space, a studio, or on stage, the 2X10C stands out as a top-tier option that meets the demands of modern musicians.