SWR Sound 350 manual Dimensions 19 W x 3.5 H x 10.125 D

Page 4

SWR BASS 350 — SPECIFICATIONS

Note: All measurements were taken with a line voltage of 120VAC. All noise specifications are “unweighted.” All voltages and watts are “RMS.” All measurements were taken with tone controls set flat, Aural Enhancer at minimum.

POWER (minimum) 450 Watts @ 2 ohms 350 Watts @ 4 ohms 240 Watts @ 8 ohms

FREQUENCY RESPONSE (Power Amplifier) –3dB @ 20 Hz and 40 kHz

SENSITIVITY (full output under clipping, 8 ohms load, 100 Hz)

Passive Input Jack: 38 millivolts

Active Input Jack: 60 millivolts

Power Amplifier (Effects Return Jack “in”): 5 volts

INPUT IMPEDANCE

Passive/Active Input: 800k Ohms

Active Input: 60k Ohms

Effects Return: 27k Ohms

OUTPUT IMPEDANCE

Effects Send: 100 Ohms

Tuner Send: 100 Ohms

Crossover Low and High Outs: 100 Ohms XLR

Balanced Out: .750 Ohms

SIGNAL TO NOISE RATIO: –72 dB (<10 millivolts typical)

EQUIVALENT INPUT NOISE: 9 microvolts

DIMENSIONS: 19" W x 3.5" H x 10.125" D

WEIGHT: 21 lbs.

BASS 350 — FRONT PANEL FEATURES

PASSIVE/ACTIVE INPUT JACK

This input jack is designed to accommodate both “passive” instruments, and most “active” instruments. A passive instrument has no built-in preamp and does not use a battery, while an “active” bass utilizes a battery operated preamp for gain, tone controls, or both. The Passive/ Active Input will work with all instruments having a maximum output of less than 1 volt RMS. Some active pickups, such as EMG, Bartolini, etc., use batteries for operation and will work per- fectly using this input. Additionally, instruments made by Pedulla, Tobias, Sadowsky, Modulus Graphite, etc., have active electronics that are suited for use in the Passive/Active input.

Generally speaking, try this input first. If you hear a small amount of distortion and the preamp clip LED is not activated, try using the Active input jack. If using the Active input does not correct any audible distortion, check the battery in your bass.

2 BASS 350 USER GUIDE

Image 4
Contents User Guide Important Safety Instructions SWR Bass 350 User Guide Dimensions 19 W x 3.5 H x 10.125 D Active Input Bass Control Master Volume Balanced XLR OUT Big Bertha Henry Triad Goliath Goliath Junior Speaker Fuse SWR Bass 350 Suggested Settings Swrsound.com

350 specifications

The SWR Sound 350 is a celebrated bass amplifier renowned for its powerful performance and user-friendly features. Designed for both professional musicians and hobbyists, this amp caters to a wide range of musical styles, making it a versatile choice for bassists.

One of the key features of the SWR Sound 350 is its impressive power output. With 350 watts of peak power, the amp ensures that players can achieve the loudness and clarity necessary for various venues, from intimate clubs to large concert halls. This power is complemented by a robust speaker cabinet that can handle the low frequencies without distortion, allowing bassists to dive deep into the music without losing punch or definition.

The SWR Sound 350 is equipped with advanced tone-shaping controls, which include a three-band EQ. This allows players to sculpt their sound according to their specific needs. The bass, mid, and treble knobs give users the flexibility to fine-tune their tone, whether they aim for a deep, smooth low-end or a bright, cutting high.

Another standout feature is the built-in limiter, which helps to prevent signal clipping and ensures that the output remains clean, even at higher volumes. This technical innovation allows players to push the amp to its limits without fearing distortion, providing peace of mind during performances.

In terms of connectivity, the SWR Sound 350 offers a range of options, including a balanced XLR output for direct connection to PA systems. This feature is exceptionally beneficial for live performances, as it allows for an uncolored, direct signal that preserves the amp's character. Additionally, there are multiple inputs for different instruments, making it easy for musicians to switch between bass guitars or even utilize a variety of effects pedals.

The chassis design is also noteworthy. Built with durability in mind, the SWR Sound 350 features a rugged outer casing that can withstand the wear and tear of frequent transport. The lightweight design makes it easy to carry around, while still maintaining a robust sound quality that players can rely on.

In summary, the SWR Sound 350 is a powerful and versatile bass amplifier that combines robust performance with user-friendly features. Its impressive wattage, advanced tone controls, built-in limiter, and multiple connectivity options make it a top choice for bassists looking for reliability and sound quality in one compact unit. Whether for practice, recording, or live performance, the SWR Sound 350 stands out as an essential tool for any serious bassist.