Bass Control

ACTIVE TONE CONTROL SECTION

The Bass Control employs a shelving type circuit and boosts or cuts the bass response +/–15dB, from about 30 Hz to 100 Hz. Starting at mid-center click-position, turning the control counter clockwise cuts the bass response and turning the control clockwise boosts the bass response.

MID RANGE SECTION

LEVEL CONTROL

The Level control cuts or boosts the frequency set by the Frequency control. Starting at mid-posi- tion, turning the Level control counter clockwise cuts the desired tone. Turning the Level control clockwise boosts the desired tone (set by the Frequency control). When the level control is set at mid (center click) position, turning the frequency control will have no effect on the sound.

To find the midrange area you are looking for:

1.Adjust the LEVEL control to the full boost or cut position.

2.Rotate the Frequency control until the desired area you wish to cut or boost is found.

3.Adjust the Level control to the desired amount of cut or boost

FREQUENCY CONTROL

The Frequency control sets the area that is to be cut or boosted by the Level function. If the Level control is set at mid-position, turning the Frequency knob will have NO effect.

Some hints: If you need to “cut through” the band a little more, try boosting 200 to 400 Hz. If you like a more transparent sound, try cutting at 800 Hz. The midrange area is especially useful in controlling fretless basses and their inherent qualities.

TREBLE CONTROL

The Treble Control employs a shelving type circuit and boosts or cuts the high frequencies and their octaves +/–15dB from about 2kHz to 14kHz. Starting at mid-center click-position, turning the control counter clockwise cuts the treble response, while turning the control clockwise boosts the treble response.

EFFECTS BLEND

The Effects Blend Control “blends” the signal sent from your instrument with the signal coming from your effects unit. With the Effects Blend full counter clockwise (“dry”), no signal from your effects will be heard. As you turn this control clockwise, more of the effect can be heard in the overall sound. When the Blend knob is fully clockwise (“wet”), no true or unaffected signal is heard other than what your effects unit provides. If your effects unit has a similar control, adjust it to the full (wet) position. This will avoid any possible phasing problems.

The Blend circuit is similar to that used on recording consoles with the effects loop on a “side chain” to the normal circuit. Unless the control is set to the full wet position, you will always get the full sound of your instrument AND get the diversity an effects unit offers. This circuit is also effective in reducing noise generated by effects units because it is located after the gain stages in the preamp.

4 BASS 350 USER GUIDE

350 specifications

The SWR Sound 350 is a celebrated bass amplifier renowned for its powerful performance and user-friendly features. Designed for both professional musicians and hobbyists, this amp caters to a wide range of musical styles, making it a versatile choice for bassists.

One of the key features of the SWR Sound 350 is its impressive power output. With 350 watts of peak power, the amp ensures that players can achieve the loudness and clarity necessary for various venues, from intimate clubs to large concert halls. This power is complemented by a robust speaker cabinet that can handle the low frequencies without distortion, allowing bassists to dive deep into the music without losing punch or definition.

The SWR Sound 350 is equipped with advanced tone-shaping controls, which include a three-band EQ. This allows players to sculpt their sound according to their specific needs. The bass, mid, and treble knobs give users the flexibility to fine-tune their tone, whether they aim for a deep, smooth low-end or a bright, cutting high.

Another standout feature is the built-in limiter, which helps to prevent signal clipping and ensures that the output remains clean, even at higher volumes. This technical innovation allows players to push the amp to its limits without fearing distortion, providing peace of mind during performances.

In terms of connectivity, the SWR Sound 350 offers a range of options, including a balanced XLR output for direct connection to PA systems. This feature is exceptionally beneficial for live performances, as it allows for an uncolored, direct signal that preserves the amp's character. Additionally, there are multiple inputs for different instruments, making it easy for musicians to switch between bass guitars or even utilize a variety of effects pedals.

The chassis design is also noteworthy. Built with durability in mind, the SWR Sound 350 features a rugged outer casing that can withstand the wear and tear of frequent transport. The lightweight design makes it easy to carry around, while still maintaining a robust sound quality that players can rely on.

In summary, the SWR Sound 350 is a powerful and versatile bass amplifier that combines robust performance with user-friendly features. Its impressive wattage, advanced tone controls, built-in limiter, and multiple connectivity options make it a top choice for bassists looking for reliability and sound quality in one compact unit. Whether for practice, recording, or live performance, the SWR Sound 350 stands out as an essential tool for any serious bassist.