HP 9000 Software Installation, Installing the Printer Driver, Configuring the TowerFeed Option

INSTALLATION

Software Installation

Installing the Printer Driver

Install the printer drivers delivered with your HP LaserJet as usual. In case of questions please refer to your printer's manual or contact your dealer.

Configuring the TowerFeed Option

The TowerFeed option has to be activated in the printer driver. To do so, go via Start – Settings – Printers to select the respective HP LaserJet driver.

In Windows 9x get via printer Properties - tab sheet Configure to the pull-down bar of the Optional Papersources: where you will see two TowerFeed models:

∙4x500-sheet TowerFeed 44, and

∙6x500-sheet TowerFeed 66.

Select the respective TowerFeed model.

The additional paper trays now will show up in the pull-down windows for the Paper Sources:.

In Windows NT you assign in Properties – Device Settings to each of the trays the respective paper size.

Paper Selection

In the application programs you select the paper sources in the Page Setup function (File - Page Setup), where all available paper sources show up in the respective Paper Sources: pull-down bar(s).

Hint:

The most recent printer drivers can be downloaded from the HP WEB site (http//:www.hp.com) or from our WEB page at http://www.rutishauser.ch/ti/sdlhp.htm.

Note:

More information and details on paper selection possibilities are described in APPENDIX B – Tips & Hints of this manual.

IU 675 / 0150 12 TowerFeedTM for the HP LaserJet 9000