HP 9000 manual Appendix a Printer Specific Notes

APPENDIX A - Printer Specific Notes

Printer Firmware Revision

The Firmware of your HP LaserJet printer must be at least Revision 02.000.0 or higher to correctly support the TowerFeed option. In case your printer does have an older Firmware, ask your dealer for a Firmware upgrade.

Printer Driver Revision

Please use the drivers received with your printer.

For the most recent driver revisions contact your dealer or consult the HP WEB or the Rutishauser WEB site at http://www.rutishauser.ch/ti/sdlhp.htm.

HP LaserJet Duplexer Option

With the TowerFeed paper handling option installed, the printer's duplexing capabilities remain fully supported.

Optional HP 2000-sheet HCI Option

TowerFeed is used in place of this option and therefore, it cannot be installed together with TowerFeed.

Optional HP 3000-sheet output Stackers

This output stacker can be installed to a printer system with TowerFeed option when using the optional stand from Rutishauser to compensate for the height difference of the units.

Other optional Devices

Besides of the HP 3000-sheet output options, no other 3rd party peripheral devices were tested together with the TowerFeed option installed. Therefore, such other devices would need to be tested first for their compliance and compatibility prior to their installation on a printer system with TowerFeed.

IU 675 / 0150 16 TowerFeedTM for the HP LaserJet 9000