RE-PACKING

Re-Packing the TowerFeed unit

To re-pack TowerFeed, proceed as follows (reverse order of steps for unpacking the unit):

∙Remove the trays and insert the transportation inserts as shown in Fig. 10 to secure the trays for shipping (it is important to secure the trays to avoid possible shipping damage).

∙Remove the PPCA (Paper Path Connection Assembly from inside the printer, Fig. 11) and pack it into the accessories box (Fig. 2).

∙Remove the 4 Rollers from the TowerFeed unit and pack them into the accessories box (Fig. 7).

∙Place the shock absorbers on the bottom of the shipping container (Fig. 5).

∙Stretch-wrap TowerFeed to prevent the trays to open during shipping.

∙Enlist the help of another person to place the TowerFeed unit inside the box. Ensure that the unit is correctly seated and cushioned (Fig. 5).

∙If part of the shipment, also include the optional stand (Fig. 4).

∙Be sure that all accessories including the PPCA, user manual, rollers and power cable are packed in the box (Fig. 2).

∙Add the blue shock absorbers on the top. Make sure that the stand is correctly seated and held between bottom and top absorbers (Fig. 3, Fig. 8).

∙Fix the accessories box with content on top of TowerFeed with a tape (Fig. 8).

∙Close the container.

Caution:

For reshipping TowerFeed you must use the original packing to avoid shipping damage of the unit.

Fig. 8 TowerFeed Packing

IU 675 / 0150

5

TowerFeedTM for the HP LaserJet 9000