Installation Instructions

INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS!

Bathroom Exhaust

Fan/Fluorescent

Light Combination

MODEL: 770F

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE. ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

B. Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally.

When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

CAUTION:

For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

B. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

C. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

D. Ducted fans must always be vented to the outdoors.

DUCT COLLAR

HOUSING

SLOTS

TABS

LENS

POWER UNIT/

BLOWER

ASSEMBLY

GRILLE

REFLECTOR

FIGURE 1

E. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

F. NEVER place a switch where it can be reached from a tub or shower.

•The exhaust fan consists of the housing, power unit/blower assembly (motor, wheel, mounting plate,) grille/lens assembly, reflector/lamp plug assembly (lamps not furnished) and duct collar.

•WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

•Not for use in kitchens.

•For installation in sloped ceilings up to 12/12 pitch.

•Ductwork must point up.

FOR BEST RESULTS

When installing the Exhaust Fan/Light in a new construction site, install housing during the rough-in construction of the building. The blower unit and grille should be installed after the finished ceiling is in place.

To install the Exhaust Fan/Light in an existing finished building see instructions page 4.

•SUITABLE FOR USE OVER A TUB OR SHOWER WHEN INSTALLED IN A G.F.C.I. PROTECTED BRANCH CIRCUIT .

770F specifications

The NuTone 770F is an innovative ventilation fan that seamlessly combines functionality with modern design. As part of NuTone's extensive range of home improvement solutions, the 770F stands out for its efficiency and style, making it an ideal choice for homeowners looking to enhance air quality while maintaining aesthetic appeal.

One of the key features of the NuTone 770F is its powerful ventilation capability. With a robust airflow rate, it effectively removes excess moisture, odors, and pollutants from the air, thus improving indoor air quality. This is particularly useful in bathrooms and kitchens where humidity levels can rise significantly. The fan’s efficient performance helps prevent mold and mildew growth, promoting a healthier living environment.

The NuTone 770F is equipped with advanced sound dampening technology, ensuring that it operates quietly. This feature is essential for areas like bathrooms where peace and tranquility are desired. The fan operates at noise levels that are barely perceptible, allowing users to enjoy their personal space without the distraction of loud mechanical sounds.

Energy efficiency is another hallmark of the NuTone 770F. Designed with modern energy-saving technologies, it helps reduce electricity consumption while delivering optimal performance. This not only lowers utility bills but also minimizes the environmental impact, making it a sustainable choice for eco-conscious homeowners.

In terms of installation, the NuTone 770F is designed for straightforward and convenient setup. It can be easily incorporated into existing ventilation systems or installed in new constructions. The product's compact design ensures that it fits well in various ceiling spaces without being obtrusive, while its sleek grille complements a range of interior designs.

Durability is also a significant characteristic of the NuTone 770F. Constructed with high-quality materials, it is built to withstand the rigors of daily use. The fan is easy to clean, ensuring that it remains in optimal condition over time.

Overall, the NuTone 770F is an excellent choice for individuals seeking a reliable, efficient, and stylish ventilation solution. Its combination of powerful moisture removal, quiet operation, energy efficiency, easy installation, and durability makes it a standout product in the market, providing both comfort and functionality in enhancing indoor air quality.