Kramer Electronics rk-1utb user manual Sliding the Tool

Install the Kramer RK-1UTB/T Under the Table Enclosure

3.Slide the TOOL with the attached bracket so that the TOOL front panel faces the TOOL opening on the RK-1UTB/Tand the “L” shaped bracket hole faces the TOOL bracket screw hole on the RK-1UTB/Tfront panel (see Figure 4).

Figure 4: Sliding the TOOL

4.Fasten the fixed bracket to the left side of the TOOL1 and fasten the attached “L” shaped bracket to the front panel of the RK-1UTB/T2(see Figure 5).

Figure 5: Attaching the TOOL to the Brackets

1 The left side when front panel is facing you

2 Through the TOOL bracket screw hole on the RK-1UTB/T front panel

6 KRAMER: SIMPLE CREATIVE TECHNOLOGY