Kobe Range Hoods RA9430SQB, RA9436SQB, RA-094 manual Install Accessories

Page 9

inner duct cover with two (4x8 mm) screws (provided).

12.Fasten outer duct cover to plastic plate on the hood with four (4x8 mm) screws (provided).

Install Accessories

13.Place baffle filters underneath the hood. Refer to Figure 10.

Final Assembly

14.Turn power ON in control panel. Check all lights and fan operation.

15.Leave this Installation Instructions and Operation Manual for the homeowner.

7

Figure 9

Figure 10

Image 9
Contents Kobe Brand Range Hood Read and Save These Instructions Page Page Must keep all material for returns or refunds Components of PackagePlease Read Entire Instructions Before Proceeding InstallationImportant Peel any protective film off the hood Preparation before InstallationWiring to Power Supply Install Accessories Turn on Operation InstructionsPress Light Control button to turn on halogen light Turn OFFTo Clean Hood Surface MaintenanceTo Clean Baffle Filter To Replace Light BulbSpecifications Measurements & Diagrams Model NO. RA9430SQB RA9436SQB Parts ListModel NO. RA9430SQB RA9436SQB Circuit Diagram Claims will not be Accepted After the Allocated Days DisclaimerWarranty Certificate WarrantyTWO-YEAR Warranty Service Period ConditionsService Consequential DamageImplied WARRANTIES/STATE LAW Product Registration Register Your ProductRecord the Following Information for Your Record
Related manuals
Manual 71 pages 10.86 Kb