Wiring to Power Supply
SAFETY WARNING
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.
1.Connect the electrical wires.
-If necessary to hide the electrical wire connections, push wires back into t Access the wire connections underneath the hood by removing the bottom casing the six screws. Before reattaching the bottom casing, make sure wires do not between motors, impellers, or any moving parts to prevent any damage.
-Connect three wires (black, white and green) to house wires and cap with wir connectors.
-Connect according to color: black to black, white to white, and green to gr
-Test the operation of the hood before moving on to the next step. Make sure supplied to the hood.
Install Accessories
1.Place the oil container (round) into keyhole under each safety screen. Turn c until firmly in place. Refer to Figure 30.
2.Slide oil container (oval) into plastic slot behind each safety screen as show 31.
Figure 30
Final Assembly
1.Turn power ON in control panel.
2.Make sure to leave this manual
Check all lights and fan operation. for the homeowner.
16